[emhtuning]

Hi guys
have some strange problem with retrofiting NBT to CIC based car. it is 2011/09 with 6wa, logic7, combox, cic, hud

I used emulator from carsystems.com.ua to not change zgw. I have now only draft instalation via temporary connection - zgw MOST connector looped and emulator MOST connected directly to ZGW, zgw can1 connected to old bus in car, can2 connected to new cables to NBT. I've also disconnected combox and looped MOST here also.

Unfortunately I don't have any sound, looks Logic AMP is little bit miscounfigured and istaD shows me Kombi is not working, funny is it is working, showing me speedo, rpm, also name of songs from NBT. What is not working is HUD. Maybe my VO is maybe not codded corectly.

Previous VO
1CA,1CB,1CC,1CD,230,258,2NB,2TB,316,320,337,402,418,423,428,459,481,488,494,4MR,4U2,502,508,522,524,536,548,575,609,610,612,614,615,616,620,633,677,698,6AA,6AB,6FL,6NF,6VC,6WA,710,715,760,761,775,7A2,7SP,801,851,879,8KA,8TF,8TH,8TN,8V1

Time criterion changed to 0712
Removed 6FL, 6VC, 633
Added 6NS

ISID will never show KOMBI as active after this retrofit , if you want to access AMP - NBT - KOMBI ( MOST ring modules ) then you need to connect esys to 169.254.199.99 gateway .

removing or adding FA to the car original VO doesn't make any difference if the NBT - KOMBI are not coded properly .

I'm sure you have followed the instructions correctly but I have attach it for you just in case , MOST Connection is the trick in this setup