[russellg]

The car originally had a CCC, i'm going to try

R056-10-03-503;R056-10-03-503;R056-10-03-503

and will report back.

Same error. Cant progress in ISTA/P

The central gateway is clearly not operating correctly: All downline control units are not responding

Anyone have any ideas?

Thanks

---

Okay,

Latest progress update.

With the original intergration level I have the following error when I run ISTA/P, obviously because the CHAMP2 was not part of my factory FA.

Original:
R056-06-12-511;R056-10-03-501;R056-08-09-510

The following control units have been identified in the vehicle:
-GW
-CON
-CID
- CHAMP2-B
- CHAMP2-A
According to the vehicle order. however. these control units are not fitted.
Remove the control units or select the corresponding conversion

But when I change my interg. level to

R056-10-03-501;R056-10-03-501;R056-10-03-501

Then I have the following error and ISTA/P will not let me proceed becuase of a non functioning gateway.

The following control units have been identified in the vehicle:
- SZL
- JBE
- EPS
-CAS
- ABS/ASC/DSC
- KOMBI
-ACSM
-GW
-CON
-80
-FRM
-CID
- CHAMP2-H/RAD-H
- CHAMP2-B
- CHAMP2-A
- DME/DDE
According to the vehicle order, however, these control units are not fitted.

The car originally had a CCC, i'm going to try

R056-10-03-503;R056-10-03-503;R056-10-03-503

and will report back.