Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
<< Perfekt Toolbox 0.2b >> e6X/e7X/e8X/e9X Cluster Tool
22-08-2018, 11:52 AM,
Post: #14
|
|||
|
|||
RE: << Perfekt Toolbox 0.1a >> e6X/e7X/e8X/e9X Cluster Tool
(22-08-2018, 11:02 AM)inotherwords Wrote:(22-08-2018, 10:19 AM)dommeij Wrote: Doesn't work 100%... i've got an 300km/h speedometer an when I try to change it to max 260km/h (just for a test, with the numbers of your screenshot) it says coding ok. But my needle is moving like in a 300km/h speedometer... Could you help me? After clicking on "read everything" button it says Speedometer max 310km/h. Don't really understand why it's not 300km/h. By saying it's moving like 300 i mean: Just imagine that the cluster is coded with max. Speed of 300km/h. When I set the "Test-drive" speed to 300km/h, the needle goes to the point x. After coding it to max. 260km/h and setting the "Test-drive" speed to 260km/h I expect the needle stops at the same point x. I coded my original 310km/h cluster for testing the software to a max. speed of 260km/h. I set the "Test-drive" speed to 260km/h and the needle doesn't move to the point x, i talked about but to the normal 260km/h point in a 300km/h cluster. Hope you know what I mean.... |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
5 Guest(s)
5 Guest(s)
Return to TopReturn to Content