Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Rear View Camera retrofit (F20)
08-05-2019, 16:30 PM,
(This post was last modified: 09-05-2019, 10:09 AM by hugo325.)
Post: #23
|
|||
|
|||
RE: Rear View Camera retrofit (F20)
I finished installing the cables for the retrofit.
Tomorrow I do the coding. I had difficulty removing and then put the trimmings in the car but with a little patience we get there I directly connected the 2 wires (K_CAN) to the FEM module because I tried to see with the connector "X382 * 1B" which normally is under the carpet driver side but unfortunately I do not have a kind of connector. So I connected directly to the FEM module. There is a mass point right next to the TRSVC module in my car. I passed the 3 wires (FBAS) driver side, under the carpet, the wires come back next to the gearbox and they follow the Idrive control wires until headunit. Here is the wiring diagram I chose: |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content