Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
FGTECH GALLETTO HARDWARE FIX AND DIFFERENCE
10-06-2015, 18:51 PM,
(This post was last modified: 11-06-2015, 07:05 AM by fantomel.)
Post: #3
|
|||
|
|||
RE: FGTECH GALLETTO HARDWARE FIX AND DIFFERENCE
Link working again.
How to read your firmware 0386 or 0475 Use any usb ttl adapter, the ones with pl2303 are prefered. You can read it with philips software or with flashmagic(that can test crp level). Baud rate from 4800 to 19200, if you get blocked with connection error reconnect galletto to usb with jumper on and try again at another speed. Do not forget to put crystal in LPC2000 to 16000 and in flashMagic to 16 Mhz. LPC2000 is the old program for Philips (actual NXP) 2XXX ..... series.Also put mark on LPC2000 for dts /rds and after push chip id like this software will detect chip auto and will choose 2119 . Look at the movie posted there. |