Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Bmw K-DCAN modification
05-12-2016, 16:49 PM,
Post: #2
|
|||
|
|||
RE: Bmw K-DCAN modification
(01-12-2016, 02:07 AM)alex.eobd2 Wrote: Hello mates.. I have a few questions about k-dcan cable..Is there any posible modification for this cable to support newer models after 3.2008?I have second cable which I buy not the cheapest one supose to be better(green pcb)but steel I can not use It on latest e-series..I find somewere seler clame they have modifyed k-dcan iven work on late f-series..I use mine with ista d/p and work good but only til 2008..so any Info about rework or hq pics from mod cable would be nice.. I think it s better to change all components on pcb than buy third one which probably dont work ...here are my pics..thanks advanced Hello Alex, you need to setup your Interface with a small exe called D-CAN (it should be on your CD which camed with your Interface. 1-Start the D-CAN.exe 2-Connenct your DCAN to USB-Port. Sometimes the Laptop need to be connected to AC Power, so you´ll get more current to the USB Port! 3-Now you have time to set up Mode for K-Line or D-CAN until the red LED turn off. If you missed this time, then unplug the Interface and put it to USB again. You have roundabout 10 seconds time to set up wether you like to work with K-Line or CAN. 4-After you turned the DCAN Mode on you can work with newer modells too. Best regards |
|||
Reputation: +1 - Automotive.Serv [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content