[dncomputech]

No one is holding me. I replaced it myself and HBA did not work.
I replaced only the HBA button because I found it the same (same pin out, same position, same color wire). Attached image
How to remove 2 SZL protective covers is relatively easy.
Upper part
https://www.newtis.info/tisv2/a/en/f10-5...t/1LkAJvrz
Bottom
https://www.newtis.info/tisv2/a/en/f10-5...t/1LdWJBrt
Replace only the circuit and the same button.
   
   
After replacement
   
I have FA added 5AC and changed Zeitkriterium = 0317 (Zeitkriterium = 0317 I have because of NBT EVO retrofitted), I do not write FA to the car, only activate FA and I make VO FRM, KOMBI, DSC, JBBF, FLA3, SZL
After VO, FDL FRM FLA_AUTO_AKTIV = automatisch
Unfortunate results, HBA also only works after the code.
Turn off the vehicle and open the car again. HBA is not working. The buttons HBA and BC are the same, both HBA and BC have the same BC function as before.
Do I need to change the Zeitkriterium the other day? Because of the label on the mirror FLA 01/05/17.
   
Or 2016 F10 LCI cannot activate HBA without HBA button on the steering wheel.