Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
HU/ATM Ethernet communication after EntryNav2 replacement
20-03-2022, 21:54 PM,
Post: #1
|
|||
|
|||
HU/ATM Ethernet communication after EntryNav2 replacement
Hi to all,
After the HU ENAV2 replacement in cars - experimented on F39 / F48 / F40 - the ethernet bit trafic between the HU and the ATM is not OK: for F39/F48 the HU communicates with ATM to retreive GPS position, but ConnectedDrive services are lost. For F40, the complete communication between HU/ATM is lost: no even GPS position. As soon as the car factory HU installed again, communication is ok gain.. tried with different HUs ENAV2. No error in ISTA, but for F48/F39 ABL for connected services update show that services are updated correctly in the ATM but not in the HU - see picture. Anyone have an idea what's the issue ? Thanks |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
HU/ATM Ethernet communication after EntryNav2 replacement - by smilo - 20-03-2022, 21:54 PM
RE: HU/ATM Ethernet communication after EntryNav2 replacement - by user_530d - 21-03-2022, 05:28 AM
RE: HU/ATM Ethernet communication after EntryNav2 replacement - by smilo - 21-03-2022, 07:40 AM
RE: HU/ATM Ethernet communication after EntryNav2 replacement - by user_530d - 21-03-2022, 07:50 AM
RE: HU/ATM Ethernet communication after EntryNav2 replacement - by smilo - 21-03-2022, 08:00 AM
RE: HU/ATM Ethernet communication after EntryNav2 replacement - by dasi - 21-03-2022, 09:14 AM
RE: HU/ATM Ethernet communication after EntryNav2 replacement - by smilo - 21-03-2022, 11:58 AM
RE: HU/ATM Ethernet communication after EntryNav2 replacement - by milkyway - 21-03-2022, 12:43 PM
RE: HU/ATM Ethernet communication after EntryNav2 replacement - by smilo - 23-03-2022, 20:35 PM
|
Users browsing this thread:
4 Guest(s)
4 Guest(s)
Return to TopReturn to Content