Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ICOM-A unable to display on-board voltage
22-04-2022, 06:50 AM,
Post: #1
|
|||
|
|||
ICOM-A unable to display on-board voltage
I have a genuine (icom-a). Recently, it was inserted into the vehicle for diagnosis. It was found that ISTA kl15 showed 0V and 12V on the vehicle. I tried all the vehicles and confirmed that my (icom-a) was indeed broken. I checked and found that one of the array pins was broken, so I replaced the whole diagnostic port pin. The last kl15 display is 0V. Have you ever encountered a similar situation?
|
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
ICOM-A unable to display on-board voltage - by bbw - 22-04-2022, 06:50 AM
RE: ICOM-A unable to display on-board voltage - by hashtagmaster - 22-04-2022, 06:52 AM
RE: ICOM-A unable to display on-board voltage - by bbw - 22-04-2022, 12:19 PM
|
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Return to TopReturn to Content