[Simple]

Version.ini in C:\AWRoot\bin\fi.

[Leon52]

Well, here you have alpha version, for people with little knows of TIC.

To Run need .NET Framework 4.0 version.

I think steps are so easy:

1) install diagbox 7.xx ( needs .45 or never for config.sys)
2) Replaced with Step 1
3) Replaced with Step 2
4) Run Setup of diagbox 8.01 and follow Simple Steps.
5) Replaced with Step 3
6) Run diagbox

i added a Do Version... that function remove all 8.XX version from ini and put 7.99 version, i think is good know that our version is not real 7.65.

I hope this program facilitates the tasks

Any problem with exe, please contact me.


EDIT:

Executable updated.

pwd via PM.

Send Pasw Please !!!

---

Installing DiagBox 8.01
This procedure and the software provided are intended for personal, educational and experimental use to install DiagBox 8.01 and related updates. I hold no responsibility for any illegal or improper usage. Carry out this procedure at your own risk.

Notice
- Links for all required software, updates and tools are in the attachments.

Preparation for Installing DiagBox 8.01 on Notebooks and VMWare Workstation
- Starting with any (32 bit) Windows (preferably XP or 7), install .NET 3.51 and Windows drivers or VMWare Tools (if on VMWare Workstation or Player).

Preparation for Installing DiagBox 8.01 on VirtualBox
- Having installed 32 bit Windows + VirtualBox Guest Additions + .NET 3.51, use the Powershell Command "Get-WMIObject win32_BIOS" or the "DMIdecode" tool to obtain BIOS information (not essential).
- Close VirtualBox and start an administrator's CMD, navigate to "C:\Program Files\Oracle\VirtualBox\" and execute the following command (Replacing "Your VM" with your Virtual Machine's name, and System Serial with your hardware's or any code or text such as "CDN29326BH"):
C:\Program Files\Oracle\VirtualBox>VBoxManage setextradata "Your VM" "VBoxInternal/Devices/pcbios/0/Config/DmiSystemSerial" "System Serial"

Installing DiagBox 8.01
1- Install DiagBox 7.01 and restart DiagBox to run update 7.02. Install update 7.xx-7.57 (this will create "C:\AWRoot\dtwr\cfg\Config.sys").
2- Install "VC++ 2008 Redistributable Package", a copy will be available in "C:\teleassistance\visualC\vcredist_x86.exe" after installing DiagBox.
3- Restart the computer and use “Kill_DiagBox_Tasks.bat” to stop related processes and rename "C:\AWRoot" to "C:\AWRoot7"
4- Run DiagBox 8.01 installation (it will uninstall v7.xx first) until it requests Activation. Close it (X) and run the tool "AWRoot_v7_Conf+Ativation_v8.exe" it will copy configuration from "C:\AWRoot7\.." and inject the necessary files.
5- Run DiagBox again, it should continue the installation successfully.

Done !,

Restart DiagBox 8.01 as Administrator to confirm all is well (don't be concerned about the reported version and do not start Lexia or PP2000 yet). If you face an issue, run the activation tool again and/or review "Versions" below.

If DiagBox runs fine, ensure you keep a backup copy of the file “C:\AWRoot\bin\fi\APPDIAG.SYS” in a safe location.

Installing Updates
1- Download and install "DiagBox_updt_802.ISO" update.
2- Download and install subsequent v8.xx updates or Maitresox updates (from 7.66+).

Versions
DiagBox will run and display the (8.xx or 7.xx) version number listed in “AWRoot\bin\fi\version.ini” file. However, Lexia or PP2000 will fail to operate with "version.ini" set to “08.xx” and "APPDIAG.SYS" will be corrupted and will need to be restored before DiagBox will work again.
So, for DiagBox, Lexia and PP2000 to operate, set the version to “7.xx” or “7.xxx” (07.81 or 07.817 can be set to indicate the true DiagBox 8 version).
[APPLICATION]
version=07.817

It is possible to operate Lexia/PP2000 (after starting DiagBox with 8.xx) by starting DiagBox while having "version.ini" listing the 8.xx only (or first), then changing it to 7.xx or commenting the line "version=08.xx" and saving BEFORE starting LEXIA or PP2000 as shown below.
[APPLICATION]
;version=08.01
version=07.65

Updates
- DiagBox v7 and v8 install and run on all x86 (32bit) Windows including 10 TH1, TH2, RS1 and RS2.
- Entering a System Serial for the Virtual Machine (as described above) resolves the "psaAagent.exe" and the missing tabs issue on VirtualBox.
- If you get "Error 2" after restarting DiagBox, try commenting "version=8.xx" in "version.ini" before restarting DiagBox again.

P.S. DiagBox has been running on Firmware 4.3.4 since 7.66/8.02.

Someone put the full installation process on the net, just edit "version.ini" as described above.



Enjoy; Simple.

I do all the steps and when I reboot it says that it can not continue installation, I have win7 32 bit ultimate and I have installed VC ++ 2008

The other doubt when I use the activation of V8 gives me an option on disk D and disk F, I have not clear this, since my virtual reader is in E and my hard drive is C, Ya format 2 times computer without results can help me . !!!

Thank you

[ljscodex]

Thanks Simple! you are the best

[Inspector_Gadget]

Are they updates patched ?

i looked in the .exe files and it looks like it to me

does anyone know where i can get un-patched updates ?

[Inspector_Gadget]

When i activate 8.01 it works fine but when i try your update it breaks the install , where can i get real updates

[Simple]

I don't know what is happening in your case, it is not happening to me or many others, may be some downloads are corrupted!!??

However, if you are connected to the net, press the button with the down arrow and it should give you a list of files to update, click on your choice and it should download the genuine files and perform the updates.

Good luck.

[peugotpower]

HI!

@simple

do you have an downlaodlink for the recommend updates from 8.20 to 8.42
or can i downlaod the updatefiles only over the diagboxupdate from internet?

a iso on mega with all updates are fine

thx

[Simple]

I think I posted a link sometime back for some of the updates, I don't remember from which to which. But you can download them from PSA site itself using DiagBox as I stated previously.

[peugotpower]

HI

I have an working set 7.83 on an winxp sp3

i use your installationfile

then when i install 8.01 und the window with the firewall comes i set unlock then will runs diagbox
with an failure i tried restart after failure again talk to the support comes in the window diagbox dosent start

i restore windows
then i can start diagbox 7,82 normaly

what must i do to run the 8xx installation succesfully

many thx

[Simple]

I am not sure I understand the issue!!
Why are you installing 8.01, do you intend to move from DiagBox 7 to DiagBox 8? What is the unlock you set?

If you try to run Lexia or PP2000 (in DiagBox), it will give an error. Is it possible that you are not changing the version.ini file to read 07 instead of 08?? edit version.ini file and set it version=07.801 or version=07.817.