Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISPI NEXT TOOL
09-07-2015, 04:25 AM,
Post: #141
RE: ISPI NEXT TOOL
(08-07-2015, 19:35 PM)hulahans Wrote:  Anybody tested expert mode with sangandis version?

I have tried on a S1000RR, Expert mode does not work, if it works on a car, i don`t know
Quote this message in a reply
[+] 2 users say Thank You to autoraedarum for this post
09-07-2015, 06:03 AM,
Post: #142
XZBMW  RE: ISPI NEXT TOOL
(08-07-2015, 23:03 PM)KALAS Wrote:  Downloadables from ISPI NEXT TOOL, ISTA/D and INSTA/P, are both incompatible with 32 bits systems?

I have seen the Rheingold version runing on a 32 bits system.

I have not tested ISTA/P yet, but ISTA/D works great on 32 Bit System. You only have to start it from the Windows Start Menu, and not from ISPI NEXT Tool.
Quote this message in a reply
09-07-2015, 09:48 AM,
Post: #143
XZBMW  RE: ISPI NEXT TOOL
Thank you for updatet!

Unfortunately get insta-p not to run.

Get an error when I start ista-p as a loader (Appendix 1) Have the error also persists, but is still useable

The second error comes when I ista p not start as a loader (Appendix 2)

What can it be?dontknow


Attached Files Thumbnail(s)
       
Quote this message in a reply
09-07-2015, 09:54 AM,
Post: #144
RE: ISPI NEXT TOOL
Very good job @Sangandi

But please check the times of 2.56.0 and 2.56.1 Registry.
Since the new tool, the entries are duplicated. And if you start over tool ISTA / P, the display no longer in full-screen. If you then open the file TaurusClientConfig.xml the setting is the same again.

If you change the setting again and starts ISTA / P not the tool but via the normal ICON the ad saved


Attached Files Thumbnail(s)
   
Quote this message in a reply
09-07-2015, 11:32 AM,
Post: #145
XZBMW  RE: ISPI NEXT TOOL
(09-07-2015, 09:48 AM)joh4nn_123 Wrote:  Thank you for updatet!

Unfortunately get insta-p not to run.

Get an error when I start ista-p as a loader (Appendix 1) Have the error also persists, but is still useable

The second error comes when I ista p not start as a loader (Appendix 2)

What can it be?dontknow

for figure 1: .net framework 4.5.2 must be first installed.
for figure 2: you must shut off WiFi and LAN cable connected.
Quote this message in a reply
[+] 2 users say Thank You to winter for this post
10-07-2015, 20:23 PM,
Post: #146
RE: ISPI NEXT TOOL
Hi everyone,
I have downloaded files and now when I am installing (ISTA/P) and I am getting this error: (see the screen shot).
Thnx,
AmdBMW


Attached Files Thumbnail(s)
   

Thnx,
amdBMW
******************
2004 BMW M3 Coupe
2006 BMW X3
2007 BMW X5
2011 BMW 535 GT
******************
Quote this message in a reply
11-07-2015, 00:52 AM,
Post: #147
RE: ISPI NEXT TOOL
Will the ISPI NEXT/ISTA-P run on SSD drive, or just on HDD?
Quote this message in a reply
11-07-2015, 01:26 AM,
Post: #148
RE: ISPI NEXT TOOL
Sangandi

Really great work
bravo

congratscongratscongratscongratscongratscongratscongrats
Quote this message in a reply
11-07-2015, 06:15 AM,
Post: #149
RE: ISPI NEXT TOOL
(11-07-2015, 00:52 AM)Napalm Wrote:  Will the ISPI NEXT/ISTA-P run on SSD drive, or just on HDD?

Yes it run on both but much faster on SSD drive.
Quote this message in a reply
11-07-2015, 06:54 AM,
Post: #150
RE: ISPI NEXT TOOL
Can i install whole ista on other drive than C:/ ? Will it work ?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW SSD Creator Ncsexpert (New Tool) scorpium59 561 41,109 Yesterday, 05:59 AM
Last Post: BSPPisz
  GenEsys Creator (New Tool FA ESYS) scorpium59 419 31,309 22-05-2024, 06:43 AM
Last Post: alsamaraee
ZBentley Tool to use to cut leather dashboard for hud retrofit Fx82 3 317 19-05-2024, 15:29 PM
Last Post: Fx82
XZBMW Tool for EGS 8HP replacement? AlpinWeiss2k18 40 8,145 24-04-2024, 13:38 PM
Last Post: BigManLT
XZBMW Tool for bench read 8hp Garryq 9 1,755 26-03-2024, 09:32 AM
Last Post: skywoker
  TESTO tool with ICOM Rolzs 5 509 17-03-2024, 20:23 PM
Last Post: Vojno
XZBMW Tool for OBD read / write ZF 8hp TIGHTFIN 7 845 10-03-2024, 07:46 AM
Last Post: syrus
  Engineering Tool mertdavid 2 690 09-03-2024, 17:24 PM
Last Post: pshoey
XZBMW Tool for 35160 eeprom Emmy67 19 3,009 28-02-2024, 13:44 PM
Last Post: Adekborys69
  hu tool & bmw engeering tool comparison Prometheus 121 41,640 22-02-2024, 13:23 PM
Last Post: codemybmw

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content