[turp9]

I get ods2522e with 4.3.3

In that case rename softing 1.20.42 folder in program files x86 and use the updated one in it's place

It works now
Also you suggested to replace the resistor.What does it affect?
On fantomel rework I also see capacitors between ram.Should I add theese too?
Can I use odis-e with it?

[apoelistas]

Yes you can use odis-e 8.1.3 with this updated softing.

It is better to add the 2 missing capacitors. I believe they safeguard  memory and it's data. Also 1 resistor 122 missing.

Dont know which job they perform though I believe last one holds true in order to safeguard memory from corrupted data/voltage spikes/voltage lows.
Capacitors are widely used in electronic circuits for blocking direct current while allowing alternating current to pass. In analog filter networks, they smooth the output of power supplies. In resonant circuits they tune radios to particular frequencies. In electric power transmission systems they stabilize voltage and power flow.

I bought the following.

100nF 16V X5R   -25'C to 85'C ±10% TDK

NOTE rule:
overrate working voltage by 2x. So for 5V modules capacitor choice is 10V. I only found 16V .

[rightpcb]

Try with ODIS 4.3.3's PDU v42. If it works, it's a genuine. For me seems to be genuine.

I tried with the ODIS 4.3.3's PDU v42 and everything worked OK, I think I had lucky find

[fantomel]

Try with ODIS 4.3.3's PDU v42. If it works, it's a genuine. For me seems to be genuine.

I tried with the ODIS 4.3.3's PDU v42 and everything worked OK, I think I had lucky find

You had lucky original, one of the few later revisions of vas5054a, since ram is cypress.

[rightpcb]

You had lucky original, one of the few later revisions of vas5054a, since ram is cypress.

As it is the later revisions of the original that why I have on board the later type Philips ISP1181ABS USB controller, when I see that and I see all the clones have that, I though it was a clone

[orkaskawina]

Hey

Is this head worth something?

with which he will best cooperate.

Thanks for the help

[fantomel]

Looks almost ok, seems also amb is original, 5v memory but 55ns not 10, a few parts to change and will be as good as original.

[reshamg]

Hey

Is this head worth something?

with which he will best cooperate.

Thanks for the help

where did u bought it from?

[turp9]

Can anyone suggest any e-shop(international/europe) where is possible to order all or most of the parts for rework. Thanks!

[orkaskawina]

Hey

Is this head worth something?

with which he will best cooperate.

Thanks for the help

where did u bought it from?

In Poland on such a regional eBay