[KaiO]

Okay, help please

[JLR SDD]

Okay, help please

Sure

[Kamcio]

What is ABS Pro? Can I retrofit IT to MY 2014 GS 1200?

Wysłane z mojego EVA-L09 przy użyciu Tapatalka

[gyver]

What is ABS Pro? Can I retrofit IT to MY 2014 GS 1200?

Wysłane z mojego EVA-L09 przy użyciu Tapatalka

ABS Pro includes two features as I understand it;
- lean angle dependent ABS (a.k.a. cornering ABS)
- dynamic brake light (flashes during emergency braking).

ABS Pro requires lean angle data, i.e. the sensor box found under the passenger seat on GS(A) + programming. Retrofit is possible from build date 08/2015 according to BMW.

[fabear]

Hi, can someone help with FSC code for R1200RS 2016 VIN Z363861 ?

[BMWF750GS]

If you want to retrofit ABS Pro,Need to write FSC in DME, APPID: 225！！But I don't know how to generate FSC with ABS Pro function！

[BMWF750GS]

I can help you done without FSC.

Refit the ABSPro of S1000R, could you please guide me? Thank you very much!

[mcrussell]

I am sure these Retrofit FSC's only possible to generate by BMW directly unless someone has worked out how to change the CERT in DME.

[BMWS1000RR]

I does not matter if you do get the FSC ABS PRO. The code must be installed with ISTA+ so that the ABS module is properly upgraded with code also. Just putting the VO/FA in the cluster does not turn on ABS PRO. That is what one of the posters in this thread was doing and it is not correct.

05AC is the VO/FA. On the S1000RR build after July 1 2016 the ABS PRO was standard release with the upgraded ABS module that allowed a few more features in the cluster for setup in USER mode. So after July 2016 it was no longer an FSC added in the ECU code, it was standard coding from the BMWAG factory.

[BMWF750GS]

I does not matter if you do get the FSC ABS PRO. The code must be installed with ISTA+ so that the ABS module is properly upgraded with code also. Just putting the VO/FA in the cluster does not turn on ABS PRO. That is what one of the posters in this thread was doing and it is not correct.

05AC is the VO/FA. On the S1000RR build after July 1 2016 the ABS PRO was standard release with the upgraded ABS module that allowed a few more features in the cluster for setup in USER mode. So after July 2016 it was no longer an FSC added in the ECU code, it was standard coding from the BMWAG factory.

thanks for your reply！！My friend is a May 2016 S1000R, low configuration, no ABSPro and DTC, Pro driving mode,He really wanted me to help him modify his motorcycle，I found it easy to install ABS Pro hardware.，It's just a body attitude sensor。I've already installed it！the problem is on the FSC!!The I have an FSC with a high S1000R！Can it be useful?？Thanks again for your reply!！