Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Can't load fake FSC SIG_CHECK_FAILURE
28-11-2018, 09:14 AM,
Post: #31
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
(28-11-2018, 08:13 AM)duckdonald Wrote: are you installing FSC patch, or FSC oem? Great! Your .bin has successfully installed all FSCs automatically. I used HUTool 2.6 before, and it can be done limited..... I always thought that "HU_SPECIAL_NBTEVO_REPAIR_NAND" was able to lift the restrictions of Compoent Protection. It seems that my understanding is wrong~ I am curious, do you have to rely on the .bin file to remove the CP restriction? Is there any other SSH command or _DEV_UDS.prg that can be done? Duckdonald, thank you very much. ![]() ![]() ![]() |
|||
29-11-2018, 00:45 AM,
Post: #32
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
Still no luck for me
1. I deleted manually Component Protection using SSH 2. Erased IPC partition/eeprom (that process also deleted VIN number) 3. Went back to istep 59 Still wont load FSC files. Now I just noticed, right after I load a fsc file, Component Protection becomes active. WTH. Is this unit VIN locked now? This is the 3rd VIN I am using on that unit. Any idea? |
|||
02-12-2018, 08:21 AM,
Post: #33
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
My HU Component Protecton is active now, i can not remove it.
![]() 0xB7F87A Komponentenschutz aktiv Testbedingungen erfüllt Fehler gespeichert Fehler würde kein Aufleuchten einer Warnlampe verursachen This is no event DTC. This ecu IS RESPONSIBLE for this error entry. Error code: B7 F8 7A 68 Maybe I need to use BIN to remove component protection (because I don't know what Shell Script can do), if you have .bin or other solutions, please PM me pricing ![]() |
|||
02-12-2018, 12:05 PM,
Post: #34
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
you can use the .bin that I had already given you.
with that you can remove CP. ![]() BMW TECHNICAL SERVICE INFORMATION - ITALY <> Full map update download all the world BMW FSC RETROFIT complete set: CIC / NBT / NBTevo id4/5/6 (Carplay included) - NBTevo VIM Map code Premium - Motion - Move - Route - Next - Evo ID4 |
|||
02-12-2018, 12:16 PM,
Post: #35
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
(02-12-2018, 12:05 PM)duckdonald Wrote: you can use the .bin that I had already given you. I have used and tried it several times, but the CP is still activated. ( all fsc is accepted ) I also tried to clear the fault code using Tool32 and ISTA+. In addition, the problem about blank screen after animation is still there, so I don't know how to continue. ![]() ![]() ![]() |
|||
02-12-2018, 15:00 PM,
Post: #36
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
(02-12-2018, 12:16 PM)smallnet Wrote:(02-12-2018, 12:05 PM)duckdonald Wrote: you can use the .bin that I had already given you. If all FSC are accepted that means CP is not active, bit confusing your statement, unless I missed something Blank screen is typical of badly performed region changed units. Tricky to fix. Might need to install a new chip. Someone will help you hopefully, I can't help to fix this particular issue I am afraid. |
|||
02-12-2018, 15:16 PM,
Post: #37
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
(02-12-2018, 15:00 PM)bmwcoder75 Wrote: If all FSC are accepted that means CP is not active, bit confusing your statement, unless I missed something This function should not need to replace chip? (I don't have this software, just the pictures I took on the website.) |
|||
02-12-2018, 15:44 PM,
Post: #38
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
(02-12-2018, 15:16 PM)smallnet Wrote:(02-12-2018, 15:00 PM)bmwcoder75 Wrote: If all FSC are accepted that means CP is not active, bit confusing your statement, unless I missed something As far as I know this would only perform a partial change. DVD region won't be changed in the process with that script. Same problem with FSCMAP etc. |
|||
12-12-2018, 12:37 PM,
Post: #39
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
Hello,
I have exactly the same problem, when I read the error codes with Esys I have the following values: 63->F4 59 02 7F B7 F8 05 2F B7 F8 09 2F B7 F8 50 2F B7 F8 B8 2F B7 F8 1A 2F B7 F8 E5 2F B7 F8 7A 2F B7 F8 7A = Component protection I manage to load the FSC files with Esys, the navigation is active during 3, 4 minutes and then I lose all the options. When I read the status FSC all are in the state "canceled". Does anyone have a solution to correct this problem? |
|||
12-12-2018, 13:44 PM,
Post: #40
|
|||
|
|||
RE: Can't load fake FSC SIG_CHECK_FAILURE
You have FSC oem, or FSC custom?
![]() BMW TECHNICAL SERVICE INFORMATION - ITALY <> Full map update download all the world BMW FSC RETROFIT complete set: CIC / NBT / NBTevo id4/5/6 (Carplay included) - NBTevo VIM Map code Premium - Motion - Move - Route - Next - Evo ID4 |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content