[mattydr67]

You can install OP-COM Prof 181022a EN and you will upgrade the firmware automatically to fw1.67 ( the latest original firmware used in this moment ).
You may check "Measuring Blocks" in newer versions because this could be added or bug fixed. All depend by the op-com developers.
But as I said you have good tool and you can used with any OP-COM software and also you can flash it with any firmware.
Good luck

[RuLe]

Hi i have installed all versione of opcom but when i start it stopped on activation

[mattydr67]

Hi i have installed all versione of opcom but when i start it stopped on activation

Do not upgrade your FTDI drivers.
Keep the version that it come with the installers (v2.8.30 or any versions up to v2.10).
Disable Automatic driver updates
Or use original OP-COM versions (no cracked) with license and you will never have any issues then a genuine interface could have. You will always use the latest FTDI driver versions and no ask for the activation.
Good luck

[RuLe]

Ok, i have resolved activation problem, but now when i start diagnosis and opcom check interface, i have an error interface not found, but in setting test recognize interface and fw intalled

[mattydr67]

In 99% cases you have a fake MCU (PIC18F458) and it is blocked.
If you like I can take a look andf tell you exactly what is your issue.
Good luck

[brahem]

As shared by the original thread maker with his official password.

thks

how to use the bt enabler?
i install it but the button still disabled not activ

thks

---

how to know what interface do i have typ B C or D?

when test adapter and choose typ c and it show ok means i have typ c?

[mattydr67]

---

how to know what interface do i have typ B C or D?

when test adapter and choose typ c and it show ok means i have typ c?

If you have a Chinese interface with relays, then your interface is Rev B. You can use it if you choose Rev B or Rev C. But you cannot connect to CH-CAN.
If your interface is modified with a Rev C adapter, then you can choose Rev C to be able to connect to CH-CAN
To see this then open it up and check if you have a adapter (electronic circuit added).
Or set it as Rev C and try to connect to a CH-CAN ecu.
Good luck

[brahem]

---

how to know what interface do i have typ B C or D?

when test adapter and choose typ c and it show ok means i have typ c?

If you have a Chinese interface with relays, then your interface is Rev B. You can use it if you choose Rev B or Rev C. But you cannot connect to CH-CAN.
If your interface is modified with a Rev C adapter, then you can choose Rev C to be able to connect to CH-CAN
To see this then open it up and check if you have a adapter (electronic circuit added).
Or set it as Rev C and try to connect to a CH-CAN ecu.
Good luck

do you have a link where to buy typ c adapter?

[mattydr67]

Is it worth to buy one?

Do you have a OPCOM v5 hardware?
The shipping cost is 10 times more than the adapter cost.
Why don't you make it by yourself?
You have all you need in the first post.

Good luck

[Patrik]

Oups , clumsy me ...... i forgot about this one below , for those that are not in the mood of making one or don't find in china one good clone to modify and don't mind to spend 60$

i found this picture from a friend




And by looking around i found out that you can buy this interface in the link from attachment.



 case  

Hi please dont you have more photos from this? Underside maybe?
thanks