Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Poll: Which version do you use? You do not have permission to vote in this poll. |
|||
ISTA/D using admin client | 65 | 29.41% | |
Standalone ISTA/D Rheingold | 156 | 70.59% | |
Total | 221 vote(s) | 100% |
* You voted for this item. | [Show Results] |
Rheingold Standalone 3.51.25
17-09-2015, 20:56 PM,
Post: #21
|
|||
|
|||
RE: Rheingold Standalone 3.51.25
|
|||
Reputation: +2 - volavka [+2] | |||
17-09-2015, 23:45 PM,
Post: #22
|
|||
|
|||
RE: Rheingold Standalone 3.51.25
I have the same message :
"Error : The vehicle could not be identified. Please check the access to the vehicle and check whether the testing-analysis etc." What I did are : 1. I went to VCI settings and choose the 1st option which is Ediabas 2. Click into identify button the I can see the light is red on the cable. (I think in this case the Com is set up correctly) 3. The Ediabas was working in background I may need to check which version Ediabas I have installed because people suggest only greater then 7.3 will works with Rheingold. Also check pin 7-8 actually I don't know about that until read this article Can you suggest me what I need to do with Ediabas folder in the Rheingold and the Ediabas which I have installed? (Do we have to override that or moving thing around.) Do I need to set the cable in D-CAN or any mode by K+DCAN utility? Some people suggest change folder of Ediabas in Rheingold config. Also can I have the link of Ediabas 7.3 or latest one please. Thanks |
|||
18-09-2015, 01:10 AM,
Post: #23
|
|||
|
|||
RE: Rheingold Standalone 3.51.25
(17-09-2015, 23:45 PM)tuanvo1982 Wrote: I have the same message : Do not mess with the contents of the Rheingold folder. |
|||
18-09-2015, 01:41 AM,
Post: #24
|
|||
|
|||
RE: Rheingold Standalone 3.51.25
So I should install a new Ediabas in C drive and leave Ediabas in Rheingold there. Do you know we need to setup something with K+DCAN Utility?
|
|||
18-09-2015, 03:25 AM,
Post: #25
|
|||
|
|||
RE: Rheingold Standalone 3.51.25
(17-09-2015, 23:45 PM)tuanvo1982 Wrote: I have the same message : From BMW Standard Tools, install only Ediabas (7.3), make sure to select the box that says USB to Serial and you will need to set COM Port 9 Here are my Ediabas & obd .ini files from my Ediabas folder, if you'd like copy them to your Ediabas --> bin folder Also make sure, under Device Manager --> Ports, right click USB Serial Port (COM 9) and select Properties --> Port Settings tab --> Advanced and make sure it looks something like this: Sorry if instructions are a little confusing. |