Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Programming KOMBI and NBT fails on F series
27-06-2016, 01:19 AM,
Post: #111
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Hi everyone,
I want to share my configuration that worked flawless: First of all the ICOM should be configured this way: ICOM Config ConnectionMode = STATIC_IP Ip = 192.168.68.85 Netmask = 255.255.255.0 Gateway = 192.168.68.99 DHCPSRV.INI [SETTINGS] IPPOOL_1=192.168.68.1-254 IPBIND_1=192.168.68.99 AssociateBindsToPools=1 Trace=1 DeleteOnRelease=0 ExpiredLeaseTimeout=3600 [GENERAL] LEASETIME=86400 NODETYPE=8 SUBNETMASK=255.255.255.0 NEXTSERVER=192.168.68.99 ROUTER_0=192.168.68.1 [DNS-SETTINGS] EnableDNS=0 [TFTP-SETTINGS] EnableTFTP=0 ROOT=C:\Users\Osx\Desktop\DHCP\wwwroot WritePermission=0 [HTTP-SETTINGS] EnableHTTP=0 ROOT=C:\Users\Osx\Desktop\DHCP\wwwroot [00-01-A9-00-EE-E9] IPADDR=192.168.68.1 AutoConfig=06/26/2016 12:41:32 Hostname=ICOM1120134 LeaseEnd=1467070189 Windows Ethernet config: "Use the following IP Address" IP 192.168.68.99 Subnet mask 255.255.255.0 Hope this help |
|||
Reputation: +2 - winter [+1] , Fx82 [+1] | |||
27-06-2016, 12:46 PM,
Post: #112
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
(04-06-2016, 04:35 AM)Marox Wrote:(22-05-2016, 13:39 PM)winter Wrote:(22-05-2016, 13:07 PM)srki7 Wrote: On the version 3.58.3003 is this problem solved Yes,I was sure "3.58.3.003+ISTA/P loader 4.9+ENET cable" couldn't programming optical modules,ISTA/P couldn't identified the VIN and maunal enter wasn't valid too. |
|||
27-06-2016, 20:42 PM,
Post: #113
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
FWIW, I flashed KOMBI using ISTA/P 3.59 + ENET, but I know previous versions had trouble. You could always fall back to E-sys, which has never had issues doing this over ENET.
|
|||
02-07-2016, 05:32 AM,
Post: #114
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Flashing Kombi with ISTA/P wasn`t also a problem. Only flashing NBT failed
|
|||
12-07-2016, 13:42 PM,
Post: #115
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Looks like problem still remain in latest 3.59.1
tried today and got still that error if I connect PC-Router-Icom do I need to change any Ip or anything in settings?? thanks |
|||
13-07-2016, 00:09 AM,
Post: #116
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
|
|||
13-07-2016, 13:10 PM,
Post: #117
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
This would apply to all F,G,I cars with the zgm,zgw which ever this car has to be able to handle the data stream you need a router in line to assist with the data transfer a straight hardwire icom to car and pc will always fail I had this happen more than once using a router is a lot cheaper than going out of pocket for a new or another used module !
|
|||
14-07-2016, 07:58 AM,
Post: #118
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Updated yesterday using dhcp server installed on laptop
all went smooth |
|||
15-07-2016, 22:10 PM,
Post: #119
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
|
|||
16-07-2016, 05:09 AM,
Post: #120
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content