[dannoodle]

Hi, so I've started the unpacking, about 12% through and just realised I haven't pressed the reinitialise mac address of network cards button. Do I need to restart or can I sort it out later?

[EuroCSL]

Hi, so I've started the unpacking, about 12% through and just realised I haven't pressed the reinitialise mac address of network cards button. Do I need to restart or can I sort it out later?

You can redo it later in settings

[dannoodle]

Im getting an error come up when I try to run the VM..

VT-x is disabled in the BIOS for all CPU modes (VERR_VMX_MSR_ALL_VMX_DISABLED).


Result Code:
E_FAIL (0x80004005)
Component:
ConsoleWrap
Interface:
IConsole {872da645-4a9b-1727-bee2-5585105b9eed}

FIXED I had to enable the VT within the host BIOS

[dannoodle]

Hi,

So am trying to get this V3 running, it seems to be stuck in a boot loop. Going between Windows is loading files & the Oracle VB splash screen. Are there any other settings which need to be changed?

[EuroCSL]

Hi,

So am trying to get this V3 running, it seems to be stuck in a boot loop. Going between Windows is loading files & the Oracle VB splash screen. Are there any other settings which need to be changed?

Did you import appliance or extracted it and remount the VMDK? Whats your computer specification?

[dannoodle]

Hi Euro,

I Imported the appliance. It's an i5 Lenovo z500 think pad

[EuroCSL]

Hi Euro,

I Imported the appliance. It's an i5 Lenovo z500 think pad

Have you tried creating a new vbox file with the VMDK image? If this doesn't work I can teamviewer you and check

[dannoodle]

Hi Euro,

I Imported the appliance. It's an i5 Lenovo z500 think pad

Have you tried creating a new vbox file with the VMDK image? If this doesn't work I can teamviewer you and check

You star!!

[EuroCSL]

Hi Euro,

I Imported the appliance. It's an i5 Lenovo z500 think pad

Have you tried creating a new vbox file with the VMDK image? If this doesn't work I can teamviewer you and check

You star!!

I assume everything is running correctly now?

---

UPDATED POST #1 PLEASE READ AND BMW VIRTUAL SYSTEM V3 LITE HAS BEEN POSTED

[dannoodle]

Hi Euro,

I Imported the appliance. It's an i5 Lenovo z500 think pad

Have you tried creating a new vbox file with the VMDK image? If this doesn't work I can teamviewer you and check

You star!!

I assume everything is running correctly now?

---

UPDATED POST #1 PLEASE READ AND BMW VIRTUAL SYSTEM V3 LITE HAS BEEN POSTED

Hi Euro,

The system boots up fine I had to modify the inf file for the driver for my K+DCAN lead - I had to do this previously to get the older DIS V57 & INPA to see the lead. So my question is, when I plug my lead in and open INPA in your package is it supposed to show the battery as on when it is not connected to the car? If it is, do I need to change a port setting?

Cheers

Dan

---

FTDIBUS\COMPORT&VID_0403&PID_0000 is the driver, the lead is an F232R UART. I have had to replace the last 4 digits of the driver for it to be recognised - the original driver is "&PID_6010"