Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
EDC15p+ VW Passat pinout problem
|
20-08-2016, 14:55 PM,
Post: #1
|
|||
|
|||
|
EDC15p+ VW Passat pinout problem
Hello friends
 I have problem with edc15p+ pinout, +12 on pin 37 & 2 GND - pin 3 K-LINE - (green wire - galletto v54 clone) - pin 16 And eobd2 wont detect it or read, even write. Can anyoone help me? |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
20-08-2016, 15:17 PM,
Post: #2
|
|||
|
|||
|
RE: EDC15p+ VW Passat pinout problem
Try boot connection
Check wiring in plug |
|||
|
|
|
20-08-2016, 15:21 PM,
(This post was last modified: 20-08-2016, 15:30 PM by esm1r.)
Post: #3
|
|||
|
|||
|
RE: EDC15p+ VW Passat pinout problem
|
|||
|
|
|
20-08-2016, 16:00 PM,
Post: #4
|
|||
|
|||
EDC15p+ VW Passat pinout problem
![[Image: 591fda091f6b11a5e2743ff2a58df992.jpg]](http://uploads.tapatalk-cdn.com/20160820/591fda091f6b11a5e2743ff2a58df992.jpg)
|
|||
| Reputation: +1 - ROD-BENDERS [+1] | |||
|
|
|
20-08-2016, 16:09 PM,
Post: #5
|
|||
|
|||
|
RE: EDC15p+ VW Passat pinout problem
I tried that, and in description box on galletto software is error: BOOT MODE INACTIVE
|
|||
|
|
|
20-08-2016, 16:24 PM,
Post: #6
|
|||
|
|||
|
RE: EDC15p+ VW Passat pinout problem
Remove chip and read/write option then
|
|||
|
|
|
20-08-2016, 16:26 PM,
Post: #7
|
|||
|
|||
|
RE: EDC15p+ VW Passat pinout problem
Only that option?
|
|||
|
|
|
20-08-2016, 19:35 PM,
(This post was last modified: 20-08-2016, 19:36 PM by abdel59.)
Post: #8
|
|||
|
|||
|
RE: EDC15p+ VW Passat pinout problem
Hi
you use mpps or fgetch? see this pictures i hope i can help you |
|||
|
|
|
21-08-2016, 13:21 PM,
Post: #9
|
|||
|
|||
|
RE: EDC15p+ VW Passat pinout problem
|
|||
|
|
|
21-08-2016, 13:29 PM,
Post: #10
|
|||
|
|||
|
RE: EDC15p+ VW Passat pinout problem
Connect Galletto socket to ecu
Connect pin 24 29f400 to GND (use also ~1kohm resistor if available). Power ON ECU. After 3-5 sec disconnect pin 24 from GND. Start Galletto program. Was I helpful? Please support my time and Hit ![[Image: tyl_add.png]](https://cartechnology.co.uk/images/CarTechnologyTheCure/english/tyl_add.png) And ![[Image: postbit_reputation.gif]](https://cartechnology.co.uk/images/CarTechnologyTheCure/english/postbit_reputation.gif) -button's. NEW Trasdata 9 Master support Bosch SM(service mode) etc  |
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
