Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA4 ENET Programming
14-10-2016, 19:56 PM,
Post: #11
|
|||
|
|||
RE: ISTA4 ENET Programming
(14-10-2016, 19:26 PM)aboulfad Wrote: @Breach, I am not concerned about bricking any ECUs, I just dont want to update my car's DME (no I dont have tunes)! its virtually impossible on my car series, especially using ISTA ! How do you know it fails for MOST-based ECUs over eth ??? hahaha, I guess you tried it ? No, I just remember that that was a problem with INPA (ISTA/P) and ENET so I'd guess it may be an issue for ISTA+. |
|||
14-10-2016, 20:02 PM,
(This post was last modified: 14-10-2016, 20:19 PM by Twoone.)
Post: #12
|
|||
|
|||
RE: ISTA4 ENET Programming
(14-10-2016, 19:56 PM)Breach Wrote:Maybee that problem can be soved with a router or virtual router just like with ICOM.(14-10-2016, 19:26 PM)aboulfad Wrote: @Breach, I am not concerned about bricking any ECUs, I just dont want to update my car's DME (no I dont have tunes)! its virtually impossible on my car series, especially using ISTA ! How do you know it fails for MOST-based ECUs over eth ??? hahaha, I guess you tried it ? Hi Aboulfad, You could try a very simple measurepan first by do a Coding Only option. you always can change back. For example HiFi Alpine only change one setting in your CIC. (Stereo to HIFI ) output of amplifier of CIC is than lower and ready for speaker wiring to input on an external ampifier |
|||
14-10-2016, 21:13 PM,
Post: #13
|
|||
|
|||
RE: ISTA4 ENET Programming
(14-10-2016, 20:02 PM)Twoone Wrote: Hi Aboulfad, Honestly, I think ISTA programming is just crap... I always use Esys and never tried ISTA/P but I wanted a challenge! So I don't have much experience with ISTA programming, all I see is ISTA wanting to do mandatory update of my DME, KOMBI and HU_NBT. I don't know how to code one feature using ISTA but I can do it with eyes closed in Esys ![]() |
|||
14-10-2016, 21:26 PM,
Post: #14
|
|||
|
|||
RE: ISTA4 ENET Programming
Go to Vehice Modification,conversion (coding only) and select an option and recalculate measureplan. ISTA wil tel you that the original measureplan is cancelled and that only the coding is carried out.
|
|||
14-10-2016, 21:43 PM,
Post: #15
|
|||
|
|||
RE: ISTA4 ENET Programming
(14-10-2016, 21:26 PM)Twoone Wrote: Go to Vehice Modification,conversion (coding only) and select an option and recalculate measureplan. ISTA wil tel you that the original measureplan is cancelled and that only the coding is carried out.yep thats where I went, but in order for ISTA to say "cancelled" that would imply to press on "execute", right ? so I didnt ![]() But you are welcome to try it, I can PM you the dll patch! |
|||
14-10-2016, 21:59 PM,
Post: #16
|
|||
|
|||
RE: ISTA4 ENET Programming
(14-10-2016, 21:43 PM)aboulfad Wrote:My car is just updated with the latest ilevel so i could try with a coding option next week on my work. I have no garage and it is getting cold and rainy in the Netherlands now(14-10-2016, 21:26 PM)Twoone Wrote: Go to Vehice Modification,conversion (coding only) and select an option and recalculate measureplan. ISTA wil tel you that the original measureplan is cancelled and that only the coding is carried out.yep thats where I went, but in order for ISTA to say "cancelled" that would imply to press on "execute", right ? so I didnt ![]() So i think you mean .dll with 6108 port setting. If you could sent me by pm so i can test next week would be nice because i do not now how to change a .dll file |
|||
14-10-2016, 22:29 PM,
Post: #17
|
|||
|
|||
RE: ISTA4 ENET Programming
@Twoone, mijn vrouw is nederlandse
![]() PS: its port 6801 BTW PPS: I said let me try a small coding conversion, and look, ISTA knows I am on wifi, hahaha, i guess i'll patch that too or just connect my cable. BTW, for those of you who have experience with this screenshot, does "execute" only execute the row selected ? |
|||
15-10-2016, 01:18 AM,
Post: #18
|
|||
|
|||
RE: ISTA4 ENET Programming
![]() "BMW.Rheingold.RheingoldSessionController.CircumventProgramingProhibition" that circumvents all checks, battery, Wlan, clamp30, ... I tried it and it works, set it to "true" to circumvent!!! Proceed with caution, and always make sure you have an adequate PSU connected. <add key="BMW.Rheingold.RheingoldSessionController.CircumventProgramingProhibition" value="true" /> |
|||
Reputation: +1 - ruben_17non [+1] | |||
15-10-2016, 07:46 AM,
Post: #19
|
|||
|
|||
RE: ISTA4 ENET Programming
(14-10-2016, 22:29 PM)aboulfad Wrote: @Twoone, mijn vrouw is nederlandseNo ISTA is going to do the complete measureplan thats written. (as far as i now, i never tried this actually) I always use a power suppy with at least 60Amps max. During the last ilevel update i saw at a certain moment 45A where needed for a F30 320D 2012/7 so i now this is important. During programming i also always switch off firewall, wifi and anti virus. |
|||
15-10-2016, 11:43 AM,
Post: #20
|
|||
|
|||
![]()
For ISTA programming I did some times I felt some benefits were as followed:
1.Speed maybe only 1/3-1/2 of ISTA/P. 2.When WiFi pop-up,no need re-start ISTA,for ISTA/P must be So I think for ISTA programming function improvement,all members need to fix its shortcoming like these: 1.programming by ENET cable 2.Active ISTA expert mode for selectable some modules for P,C like ISTA/P 3.Static IP,router,or DHCPSVR etc for IP assign for MOST by ENET cable Let's do our best.thx |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
![]() |
ISTA 4.33.30 The programming system could not be initialised | Edward1968 | 40 | 8,751 |
01-06-2024, 09:50 AM Last Post: iyade46 |
ISTA 4.47 programming N/A | Neon10 | 7 | 581 |
28-05-2024, 07:46 AM Last Post: Thomas77 |
|
![]() |
Motorrad esys coding using ENET and ICOMD cable | bennymx | 17 | 3,129 |
09-05-2024, 11:20 AM Last Post: Vojno |
![]() |
BMW Remote ENET | B O S S | 11 | 1,482 |
06-04-2024, 17:38 PM Last Post: Jalami |
FEM Not working with ENET but works wtih DCAN | armenh7 | 2 | 334 |
01-04-2024, 20:21 PM Last Post: armenh7 |
|
![]() |
Solved ✔ ISTA Standalone WLAN programming | botho | 4 | 439 |
21-03-2024, 11:13 AM Last Post: botho |
![]() |
F15 Programming Error | mcrussell | 7 | 546 |
20-03-2024, 05:38 AM Last Post: SweetBMW |
![]() |
BMW X6 E71 Programming | Ryzen | 5 | 339 |
16-03-2024, 12:42 PM Last Post: Node |
![]() |
problem with flashing CHAMP2 module (the programming dependencies are not correct) | azwgh | 17 | 1,050 |
11-02-2024, 19:39 PM Last Post: azwgh |
ISTA AOS and enet cable | Wojti77 | 6 | 1,354 |
24-01-2024, 04:28 AM Last Post: vipsha |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content