Possibly Related Threads…

***ChampioNbg*** · 25-07-2017, 17:34 PM,

Please to me as well, thanks smile

***Jartsa*** · 26-07-2017, 03:42 AM,

Anyone got any info?

***umutbulut*** · 26-07-2017, 04:24 AM,

I suppose this will end as usual: Somebody states to post "secret" information "soon", everybode gets excited and... nothing happens. sad

***hkgans*** · 26-07-2017, 07:29 AM,

I hope that 'somebody' will finally show us the right path.

My ID5 EVO has a GPS port which works correctly with a non-OEM gps antenna. And then I tried to retrofit a new ATM (CHN 3G roof mount version, fitted with OEM GPS antenna). I connected the EVO to ATM via OABR connectors EVO p2 -> ATM p4, and EVO p4 -> ATM p2. And other connections like ATM +12/Ground, ATM CAN2 H/L.

I setup the EVO and ATM with ZGW on the bench and flashed the ATM. But the ethernet connection to the ATM didn't work. ESys fall back to use CAN bus which took almost an hour. I flashed the ATM with the same VIN as in the EVO.

I had used TOOL32 to look at the IP configuration of the ATM. It had a random generated IP address starts with 169.xxx.xxx.xxx. I tried to ping this IP but it didn't respond.

What did I do wrong?

***FSCmap*** · 26-07-2017, 10:50 AM,

(26-07-2017, 07:29 AM)hkgans Wrote: I hope that 'somebody' will finally show us the right path.

My ID5 EVO has a GPS port which works correctly with a non-OEM gps antenna. And then I tried to retrofit a new ATM (CHN 3G roof mount version, fitted with OEM GPS antenna). I connected the EVO to ATM via OABR connectors EVO p2 -> ATM p4, and EVO p4 -> ATM p2. And other connections like ATM +12/Ground, ATM CAN2 H/L.

I setup the EVO and ATM with ZGW on the bench and flashed the ATM. But the ethernet connection to the ATM didn't work. ESys fall back to use CAN bus which took almost an hour. I flashed the ATM with the same VIN as in the EVO.

I had used TOOL32 to look at the IP configuration of the ATM. It had a random generated IP address starts with 169.xxx.xxx.xxx. I tried to ping this IP but it didn't respond.

What did I do wrong?

We can solve your problem by remote connection. Please PM.

***hkgans*** · 27-07-2017, 03:28 AM,

Hi Fscmap, please check PM.

(26-07-2017, 10:50 AM)FSCmap Wrote:
(26-07-2017, 07:29 AM)hkgans Wrote: I hope that 'somebody' will finally show us the right path.

My ID5 EVO has a GPS port which works correctly with a non-OEM gps antenna. And then I tried to retrofit a new ATM (CHN 3G roof mount version, fitted with OEM GPS antenna). I connected the EVO to ATM via OABR connectors EVO p2 -> ATM p4, and EVO p4 -> ATM p2. And other connections like ATM +12/Ground, ATM CAN2 H/L.

I setup the EVO and ATM with ZGW on the bench and flashed the ATM. But the ethernet connection to the ATM didn't work. ESys fall back to use CAN bus which took almost an hour. I flashed the ATM with the same VIN as in the EVO.

I had used TOOL32 to look at the IP configuration of the ATM. It had a random generated IP address starts with 169.xxx.xxx.xxx. I tried to ping this IP but it didn't respond.

What did I do wrong?

We can solve your problem by remote connection. Please PM.

***TheShafro*** · 27-07-2017, 10:27 AM,

Bump, hopefully someone has the actual solution

***coach.recio*** · (This post was last modified: 27-07-2017, 14:22 PM by coach.recio.)

Can you tell us how do you connect ATM with Evo? Thank you so much!

(26-07-2017, 07:29 AM)hkgans Wrote: I hope that 'somebody' will finally show us the right path.

My ID5 EVO has a GPS port which works correctly with a non-OEM gps antenna. And then I tried to retrofit a new ATM (CHN 3G roof mount version, fitted with OEM GPS antenna). I connected the EVO to ATM via OABR connectors EVO p2 -> ATM p4, and EVO p4 -> ATM p2. And other connections like ATM +12/Ground, ATM CAN2 H/L.

I setup the EVO and ATM with ZGW on the bench and flashed the ATM. But the ethernet connection to the ATM didn't work. ESys fall back to use CAN bus which took almost an hour. I flashed the ATM with the same VIN as in the EVO.

I had used TOOL32 to look at the IP configuration of the ATM. It had a random generated IP address starts with 169.xxx.xxx.xxx. I tried to ping this IP but it didn't respond.

What did I do wrong?

(27-07-2017, 14:20 PM)coach.recio Wrote: Can you tell us how do you connect ATM with Evo? Thank you so much!

Can you tell us how to connect ATM with Evo? It may be part of the solution smile

***hkgans*** · 28-07-2017, 00:57 AM,

(27-07-2017, 14:20 PM)coach.recio Wrote: Can you tell us how do you connect ATM with Evo? Thank you so much!

(26-07-2017, 07:29 AM)hkgans Wrote: I hope that 'somebody' will finally show us the right path.

My ID5 EVO has a GPS port which works correctly with a non-OEM gps antenna. And then I tried to retrofit a new ATM (CHN 3G roof mount version, fitted with OEM GPS antenna). I connected the EVO to ATM via OABR connectors EVO p2 -> ATM p4, and EVO p4 -> ATM p2. And other connections like ATM +12/Ground, ATM CAN2 H/L.

I setup the EVO and ATM with ZGW on the bench and flashed the ATM. But the ethernet connection to the ATM didn't work. ESys fall back to use CAN bus which took almost an hour. I flashed the ATM with the same VIN as in the EVO.

I had used TOOL32 to look at the IP configuration of the ATM. It had a random generated IP address starts with 169.xxx.xxx.xxx. I tried to ping this IP but it didn't respond.

What did I do wrong?

(27-07-2017, 14:20 PM)coach.recio Wrote: Can you tell us how do you connect ATM with Evo? Thank you so much!

Can you tell us how to connect ATM with Evo? It may be part of the solution

hi coach

my connection is:
atm oabr
pin 2 .......> evo oabr pin 4 Ethernet
pin 4 .......> evo oabr pin 2 Ethernet
pin 7 ......> to any CAN 2 high
pin 9 ......> to any CAN 2 low

atm black 6 pin
pin 3 ..... +12
pin 4 ...... ground

I didn't connect other pins such as the microphone, acsm and roof light module ETC. those will be done later if the rtti is successful.

while I am waiting for someone to give me hint on my setup, I will redo my evo VO coding properly with 6AE this time. will report later.

***coach.recio*** · 28-07-2017, 14:58 PM,

(28-07-2017, 00:57 AM)hkgans Wrote: hi coach

my connection is:
atm oabr
pin 2 .......> evo oabr pin 4 Ethernet
pin 4 .......> evo oabr pin 2 Ethernet
pin 7 ......> to any CAN 2 high
pin 9 ......> to any CAN 2 low

atm black 6 pin
pin 3 ..... +12
pin 4 ...... ground

I didn't connect other pins such as the microphone, acsm and roof light module ETC. those will be done later if the rtti is successful.

while I am waiting for someone to give me hint on my setup, I will redo my evo VO coding properly with 6AE this time. will report later.

Thank you so much, hkgans! Two more questions:
- Which cable have you used to link ATM with Evo?
- Where do you recommend to buy ATM?

I hope this thread solve all our questions!

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Bmw G31 retrofit Mgu id7 atm problem	intranet	20	2,465	26-04-2024, 08:06 AM Last Post: smilo
	Kafas issue aftrer ACC Retrofit	It3_Magic	14	626	23-04-2024, 07:44 AM Last Post: It3_Magic
	G82 rear tail lights CSL retrofit	Sauron	10	798	20-04-2024, 07:35 AM Last Post: SANYA
	BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS	intel123	891	467,991	20-04-2024, 01:05 AM Last Post: fe7565
	Neck warmer retrofit	Just2fast5	5	391	17-04-2024, 11:20 AM Last Post: Spirit5676
	ID4 evo to ID6 Evo full retrofit, ATM issues 03178A	mitch32	1	195	15-04-2024, 17:52 PM Last Post: mitch32
	NBT EVO - RTTI VIN numbers	Kamcio	1	198	12-04-2024, 21:26 PM Last Post: shaggyshadow
	BMW E84 Cruise control retrofit not workig	Alyn546	4	226	12-04-2024, 14:23 PM Last Post: DieStream
	F10 FLA retrofit	beng2k	30	1,056	11-04-2024, 18:43 PM Last Post: beng2k
	BMW f20 KOMBI2 retrofit	bm92	15	527	10-04-2024, 07:51 AM Last Post: bm92

Contact Us