Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
21-08-2017, 12:14 PM,
Post: #491
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(17-08-2017, 04:45 AM)Loliceman Wrote:(17-08-2017, 02:45 AM)pctravel Wrote: Thanks for the detail. I was preparing to run the patch but I did decide to save the existing FSC codes with Dr Gini. From what it looks like they already installed the 9C BMW apps code. Am I reading this correctly from the attached picture? Under Stat_FSC_Cert Dr Gini reports as "Accepted" just like all my other FSC codes but under "STAT_FSC_STATUS" it says "Unavailable" for the 9C BMW Apps FSC. I'm assuming that is because the 6NR option is not coded so all I really need is to add this option now. Correct? |
|||
21-08-2017, 19:30 PM,
Post: #492
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
Hey:
I'm new to the forum and to BMW's I have a 2011 328xi, and am trying to get the satellite radio functionality enabled. I've been doing some reading of this awesome info provided by the OP and others and it seems like the way to go. I do however have some newb questions and don't want to bother anyone by posting them here. I'm wondering if someone who has had success and has the time might PM or email me. Thanks |
|||
23-08-2017, 18:53 PM,
Post: #493
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
I followed the instructions to create my FSC codes from the templates and thought before I install them that I would create the Map code from the B1 template. I'm assuming that it doesn't work this way or my B1 code I made doesn't work because using the generator doesn't load the FSC code in the decoder. I'm assuming that I need to complete the patch, upload all codes and the certs then read the B1 out of the car and generate the code as normal. Right?
|
|||
25-08-2017, 00:50 AM,
Post: #494
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(23-08-2017, 18:53 PM)pctravel Wrote: I followed the instructions to create my FSC codes from the templates and thought before I install them that I would create the Map code from the B1 template. I'm assuming that it doesn't work this way or my B1 code I made doesn't work because using the generator doesn't load the FSC code in the decoder. I'm assuming that I need to complete the patch, upload all codes and the certs then read the B1 out of the car and generate the code as normal. Right? Yes that is correct Please, Press the Buttons and if you feel that this post helped you!
|
|||
27-08-2017, 10:50 AM,
(This post was last modified: 27-08-2017, 10:51 AM by eimantas28.)
Post: #495
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
Can anybody help me to patch my CIC USA for E60 wich is now working with emulator? I can pay for helping me. THANKS!
|
|||
27-08-2017, 13:48 PM,
(This post was last modified: 27-08-2017, 14:04 PM by Arch30n.)
Post: #496
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
Hi,
I'm stuck trying to execute job "GetFSC" with FStool or "Read" with DrGINI on a E60 LCI 05/2009 with factory CIC ("GetStatus" or "Identification" work fine with my D+KCAN USB cable but i cannot go further ) I've also tryed with my ENET cable which i use to ftp/telnet the CIC successfully, but it doesn't work with FStool or DrGINI (my EDIABAS is well configured). Is because ENET cable doesn't work on a E60 LCI with factory CIC for FSC reading/importing ? Does it need a ICOM ? Is it possible to import the FSC with a USB script ? Thanks 2009 BMW E60 525DA LCI - EGR/DPF Removed+DownPipe+Stage 2 - S620A and Combox Retrofit with 6NF/6FL/6NR - Some other codings...
|
|||
28-08-2017, 07:48 AM,
(This post was last modified: 28-08-2017, 07:51 AM by fumantwo.)
Post: #497
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
For the 1b, not all the generators support the one created and signed with the intel´s patcher. I only get one working without any problem with original and signed, and it is (at least for me) the generator that include the ibac generator. That worked me without any issue.
You don´t need to upload the 1B and then donwload it back again (should be same), you can generate the code once you sign it on your pc. For then when you upload, and check FSC´s plug the map and start update. |
|||
28-08-2017, 08:12 AM,
(This post was last modified: 28-08-2017, 08:18 AM by Arch30n.)
Post: #498
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(28-08-2017, 07:48 AM)fumantwo Wrote: For the 1b, not all the generators support the one created and signed with the intel´s patcher. I only get one working without any problem with original and signed, and it is (at least for me) the generator that include the ibac generator. That worked me without any issue. Thanks for your reply, my problem is to know if after patching the CIC i will be able to import the FSCs, that's why i wanted to do a "get/read" test before. I don't want to get stuck, cause i don't have a ICOM. (I already have my 1B file (older script+ftp method)). 2009 BMW E60 525DA LCI - EGR/DPF Removed+DownPipe+Stage 2 - S620A and Combox Retrofit with 6NF/6FL/6NR - Some other codings...
|
|||
28-08-2017, 09:21 AM,
(This post was last modified: 28-08-2017, 09:23 AM by fumantwo.)
Post: #499
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
My post was to pctravel, that coments problems with generate the key for uptade the map.
Your problem i think, i´m not an advanced user, think it was coment here, over the page 11 or so (LINK), i think you have the same issue like me when I patch my cic (my car is a 06 e91), that the fstool can not upload or download the 1b and other, i did not remember which one, is a problem with the ediabas, look for the tips given by sebastianfernandes to fix it. At least, as far as I know, to connect with Fstool/gini to the cic on a e series car, without the telnet methot is with the kdcan or icom. But, if you can connect to the cic via FTP, you can upload the FSC´s and then check them with fstool or gini. |
|||
28-08-2017, 09:23 AM,
Post: #500
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
You don't need an icom ig you're using FSTOOL to import fsc, gini i doubt because I've never tried with k+dcan cable in. Nevertheless FSTOOL will do the job for you with k+dcan.
(28-08-2017, 08:12 AM)Arch30n Wrote:(28-08-2017, 07:48 AM)fumantwo Wrote: For the 1b, not all the generators support the one created and signed with the intel´s patcher. I only get one working without any problem with original and signed, and it is (at least for me) the generator that include the ibac generator. That worked me without any issue. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Return to TopReturn to Content