[pbrotea]

I installed this on my windows 7 Pro 64 bit system and got it to work perfectly and update just fine. After rebooting though, the Hardlock is lost. It is hard to successfully reinstall the Hardlock; but I've done it successfully several times. When it is successful, the Harlock entries show up in Device Manager under Universal Serial Bus controllers (SafeNet Inc. Hardlock Key and SafeNet Inc. USB Key) and the program starts without error. Once I reboot, the entries disappear from Device Manager and I get the Hardlock error. This also has the same effect on my PET program. Hardlock entries present everything fine; entries missing neither program starts. ETKA 7.5 plus and PET 7.3 plus have been running fine for years with no errors before this ETKA 8.0 update. I also have cloned hard drives with the old ETKA 7.5 plus program just before updating to ETKA 8.0 and they still work perfectly. Anyone else have this problem, or any ideas for a solution?? Any help would be greatly appreciated.

[sixcode]

I installed this on my windows 7 Pro 64 bit system and got it to work perfectly and update just fine. After rebooting though, the Hardlock is lost. It is hard to successfully reinstall the Hardlock; but I've done it successfully several times. When it is successful, the Harlock entries show up in Device Manager under Universal Serial Bus controllers (SafeNet Inc. Hardlock Key and SafeNet Inc. USB Key) and the program starts without error. Once I reboot, the entries disappear from Device Manager and I get the Hardlock error. This also has the same effect on my PET program. Hardlock entries present everything fine; entries missing neither program starts. ETKA 7.5 plus and PET 7.3 plus have been running fine for years with no errors before this ETKA 8.0 update. I also have cloned hard drives with the old ETKA 7.5 plus program just before updating to ETKA 8.0 and they still work perfectly. Anyone else have this problem, or any ideas for a solution?? Any help would be greatly appreciated.

64x needs special hardlock emulator 32x will not work properly

[classexa]

I've now installed the latest updates in ETKA 8.0 and everything works fine

[TricePa]

I've installed ETKA 8.0 with succeed but not when i click on etka it wont open and nothing happens

[sastil_GTD]

I've installed ETKA 8.0 with succeed but not when i click on etka it wont open and nothing happens

Same for me!!!

[MarcinOslo]

Edit: After installing it one last time, it now works!

I installed the updates manually one by one from the ETKA7.5_International_Updates_2017 folder. Until I had 1185-711-717-1185. Then I installed ETK8-UPGRADE-1186-712-718-1186.EXE from the ETKA8_International_Upgrade_2017 folder. Just like the instruction said. The only difference when I installed it this time is that I manually installed the updates one by one

You was right !!

I did the same now and it works.
I spent more then 20 hours for installing .. ,but finally is working.

[classexa]

Edit: After installing it one last time, it now works!

I installed the updates manually one by one from the ETKA7.5_International_Updates_2017 folder. Until I had 1185-711-717-1185. Then I installed ETK8-UPGRADE-1186-712-718-1186.EXE from the ETKA8_International_Upgrade_2017 folder. Just like the instruction said. The only difference when I installed it this time is that I manually installed the updates one by one

You was right !!

I did the same now and it works.
I spent more then 20 hours for installing .. ,but finally is working.

Yes, it took quite a while installing it one by one. But in the end it worked

[Albert J]

Edit: After installing it one last time, it now works!

I installed the updates manually one by one from the ETKA7.5_International_Updates_2017 folder. Until I had 1185-711-717-1185. Then I installed ETK8-UPGRADE-1186-712-718-1186.EXE from the ETKA8_International_Upgrade_2017 folder. Just like the instruction said. The only difference when I installed it this time is that I manually installed the updates one by one

You was right !!

I did the same now and it works.
I spent more then 20 hours for installing .. ,but finally is working.

Yes, it took quite a while installing it one by one. But in the end it worked

On my Installation is still the same, would not install.
Tried takis' solution as well, No go for now.
I appreciate sixcode and 911turbo uploaded registry information, and I spent quite a bit of time with all that, but so far the update exe will not proceed.

AJ

[belkor]

Can confirm it works on windows 7 ultimate 32bit vmware

[titou43]

Hello
Many thanks for your works !!!


Is it possible to have actualisation of the price in this version of ETKA ?

Best regard at all