Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Please, can you help me problem dde
29-05-2017, 10:21 AM,
Post: #1
|
|||
|
|||
Please, can you help me problem dde
Hello. I bought galletto v54 cable and tried to read my ecu. But a cable was let loose and a spark struck in the dde. So the car does not start now.
Can I buy a used ecu with the same reference and run the car? Right now the diagnosis tells me that there is no voltage in the ECU. |
|||
29-05-2017, 11:21 AM,
Post: #2
|
|||
|
|||
RE: Please, can you help me problem dde
(29-05-2017, 10:21 AM)zonum Wrote: Hello. I bought galletto v54 cable and tried to read my ecu. But a cable was let loose and a spark struck in the dde. So the car does not start now. hello you could buy used ecu but will need programming. what car is this for ? Also post picture or 2 of ecu might be possible to repair If mine or others posts and info are helpful please give thanks/rep
|
|||
30-05-2017, 04:40 AM,
Post: #3
|
|||
|
|||
RE: Please, can you help me problem dde
My car is a bmw 520d 177 cv 2009 year, ecu edc17cp02.
Ecu is this refference bosch 0281016067. If I buy ecu with this refference and I programming with ista-p for example, is it good? |
|||
30-05-2017, 08:24 AM,
(This post was last modified: 30-05-2017, 17:53 PM by pdc.)
Post: #4
|
|||
|
|||
RE: Please, can you help me problem dde
Hi
it is not enough ,because ISTA P does not program the secret Key (ISN) and the car does not start. If you could read the old ECU you could copy to new one, but without been able to read it is more difficult,you should try to read it with kess or Ktag tool. If the car is manual you can do immo off after programming with ista P and everything works,or buy ECU+CAS+KEYS from another car. ,if it is autobox it is a lot harder. (30-05-2017, 04:40 AM)zonum Wrote: My car is a bmw 520d 177 cv 2009 year, ecu edc17cp02. |
|||
28-09-2017, 11:30 AM,
Post: #5
|
|||
|
|||
RE: Please, can you help me problem dde
Need to do immo off
can be done in mcu flash read it in boot mode with ktag do immo off and flash it back in boot mode tested and working if need help pm |
|||
28-09-2017, 17:23 PM,
Post: #6
|
|||
|
|||
RE: Please, can you help me problem dde
|
|||
10-10-2017, 12:11 PM,
Post: #7
|
|||
|
|||
RE: Please, can you help me problem dde
Cannot program used ecu on bmw with bmw oficial tools !!
ecu with same sw hw number will be ok but must remove immo of create ecu files with isn from your ews , cas, and write it in replacement ecu. remove immo is from replacement ecu ecu is more simple and faster solution |
|||
10-10-2017, 12:22 PM,
Post: #8
|
|||
|
|||
RE: Please, can you help me problem dde
If u can read Eprom from your DDE end read Eprom from your CAS3 i can solve your problem.
If u have Autohex or BMW explorer u can do all this by OBD |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
BMW MGU21 Emmc Writing Problem (Request) | donjuan020 | 10 | 526 |
5 hours ago Last Post: donjuan020 |
|
BMW e87 LCI hralights retrofit problem | XeoN | 1 | 55 |
31-05-2024, 14:40 PM Last Post: wrp_199 |
|
G30 Entrynav2 - rear camera retrofit problem | Krysiaman | 19 | 1,412 |
23-05-2024, 20:39 PM Last Post: Node |
|
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,737 |
26-04-2024, 08:06 AM Last Post: smilo |
|
NBT EVO Connected Drive problem after update I-Level | SkeYT | 47 | 4,932 |
22-04-2024, 11:44 AM Last Post: kwat |
|
BMW E60 coding problem | GarageX | 8 | 404 |
02-04-2024, 10:07 AM Last Post: GarageX |
|
Bmw 5,f10 radio problem | RobertRexhaj | 3 | 193 |
28-03-2024, 18:47 PM Last Post: Unspec |
|
ISTA launcher problem | Red_bean_bun | 1 | 305 |
26-03-2024, 05:11 AM Last Post: 2013m5 |
|
Dme Cas synchronization Problem | donjuan020 | 3 | 298 |
25-03-2024, 21:55 PM Last Post: BmwMerc |
|
BMW e39 530d 2001 problem after MAF change | boweld11 | 3 | 195 |
24-03-2024, 22:44 PM Last Post: SkeYT |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content