Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

VAS5054A PCB Difference
23-10-2017, 18:54 PM, (This post was last modified: 25-10-2017, 07:11 AM by prospeed.)
Post: #151
RE: VAS5054A PCB Difference
    ok quick update on my vas5054 rework, all components are soldered, (as per fantomel’s rework pics, thanks) working good so far will try it tomorrow to flush ecu and see how it goes, anyway just wanted to say that diod has to be reposition otherwise my tool didnt want to power up after I soldered the voltage regulator LT3010.
Quote this message in a reply
23-10-2017, 19:37 PM, (This post was last modified: 23-10-2017, 19:37 PM by Amaa.)
Post: #152
RE: VAS5054A PCB Difference
Is there any known place to sell a good quality vas clone??
Or should I just buy cheapest I can get and rework it? fail
Quote this message in a reply
23-10-2017, 19:43 PM, (This post was last modified: 24-10-2017, 21:34 PM by fantomel.)
Post: #153
RE: VAS5054A PCB Difference
(23-10-2017, 19:37 PM)Amaa Wrote:  Is there any known place to sell a good quality vas clone??
Or should I just buy cheapest I can get and rework it? fail

yes there is, I will pm you link

REQUESTS IN PM NOT IN THREAD - Fantomel
Reputation: +1 - Amaa [+1]
Quote this message in a reply
[+] 6 users say Thank You to prospeed for this post
25-10-2017, 07:08 AM,
Post: #154
RE: VAS5054A PCB Difference
(23-10-2017, 19:43 PM)prospeed Wrote:  
(23-10-2017, 19:37 PM)Amaa Wrote:  Is there any known place to sell a good quality vas clone??
Or should I just buy cheapest I can get and rework it? fail

yes there is, I will pm you link

REQUESTS IN PM NOT IN THREAD - Fantomel

I didnt make any requests in the thread
Quote this message in a reply
05-11-2017, 00:39 AM, (This post was last modified: 05-11-2017, 09:53 AM by andrei3333.)
Post: #155
RE: VAS5054A PCB Difference
People! Who has already changed everything that is possible, but gets an error of 200 ...., replace it and you will be happy!
!!! In this photo, the board is not changed, just for reference!!!


Attached Files Thumbnail(s)
   
Quote this message in a reply
05-11-2017, 06:39 AM, (This post was last modified: 05-11-2017, 14:40 PM by apoelistas.)
Post: #156
RE: VAS5054A PCB Difference
smile chage oki to non fake and retest. Not a good reference board.

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
05-11-2017, 19:13 PM,
Post: #157
RE: VAS5054A PCB Difference
(05-11-2017, 00:39 AM)andrei3333 Wrote:  People! Who has already changed everything that is possible, but gets an error of 200 ...., replace it and you will be happy!
!!! In this photo, the board is not changed, just for reference!!!
giggle
Your TJA1054 is upside down biggrin
Quote this message in a reply
[+] 2 users say Thank You to Marcos for this post
07-11-2017, 00:29 AM,
Post: #158
RE: VAS5054A PCB Difference
Sorry for double post but if someone can rate this clone.

[Image: 0f6fa9-1510012788.jpg]

[Image: e0a039-1510012918.jpg]

[Image: 68ff63-1510012970.jpg]

[Image: c8c5c0-1510013030.jpg]

[Image: 2479e0-1510013083.jpg]

Thank you.
Visit this user's website
Quote this message in a reply
[+] 2 users say Thank You to Thomas M. for this post
07-11-2017, 05:46 AM, (This post was last modified: 07-11-2017, 06:52 AM by apoelistas.)
Post: #159
RE: VAS5054A PCB Difference
(07-11-2017, 00:29 AM)Thomas M. Wrote:  Sorry for double post but if someone can rate this clone.
Thank you.

The only possible problem is bluetooth, but it was reported that some chinese BT can do the same (firmware update downgrade)

memory a bit slower than the 10ns but stable.

All chips are original a5780 exists and oki is original. 2 chips/resistors between the 2 memories are missing (what happens if they are not soldered I am not sure)

where did you get it from??

if you had amb2300 installed and 10ns memory, plus missing memory resistors it would be classified as perfect clone.

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Reputation: +1 - Thomas M. [+1]
Quote this message in a reply
[+] 4 users say Thank You to apoelistas for this post
07-11-2017, 08:45 AM,
Post: #160
RE: VAS5054A PCB Difference
At apoelitstas, “2 chip/resistors between the 2 memories” are actualy capacitors, also one voltage regulator needs to be soldered and chip A1040 has to be TJA1050, and if it after the test doest get “OK” it has to change A5780A chip as may not be original. RAM chips are not good as they are not 5v but rather 1.6v-3.5
Quote this message in a reply
[+] 6 users say Thank You to prospeed for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  Odis S 7.2.1 + E 12.2.0 for Vas5054a Win10 Updated2023 Vmware srzar 3 1,204 20-01-2024, 16:23 PM
Last Post: lalle
  Drivers VAS5054A blue MORKAS 1 354 28-12-2023, 22:46 PM
Last Post: vagvag
  VAS5054A PassThru drivers audi666 6 506 22-12-2023, 09:46 AM
Last Post: audi666
ZTAudi VAS5054A clone drivers HELP Dišovas 4 888 13-09-2023, 10:31 AM
Last Post: Peterwall
  Spotting a good VAS5054a clone interface in 2023 Yonder 9 919 29-08-2023, 08:32 AM
Last Post: audi666
ZVW Latest Odis S and E versions that work with VAS5054A? getaibose 8 1,105 22-07-2023, 17:30 PM
Last Post: audi666
  VAS5054A w. PassThru and Odis Projectns 4 1,031 03-07-2023, 11:56 AM
Last Post: aaronpaul
  SVCI 6154A vs VCX NANO 6154A vs VAS6154A clone vs VAS5054A codingbmwsofia 14 2,594 27-06-2023, 15:58 PM
Last Post: nigeeemac999
  vas5054a software coder 7 902 14-06-2023, 16:48 PM
Last Post: Tekero
  Difference firmware dq500 drjb 0 226 12-04-2023, 16:25 PM
Last Post: drjb

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content