[dave1982]

Hello,
i'm looking for someone who can readout or change the pin from my dashboard dump.
when i look in eeprom menu it shows FFFF.
and i'm not able to program it.

[dil6222]

Hello,
i'm looking for someone who can readout or change the pin from my dashboard dump.
when i look in eeprom menu it shows FFFF.
and i'm not able to program it.

Try resetting then program you using opcom to program ?

[Ashraf6119]

If you find its FFFF means the dash is not programmed to this vehicle and you should have a fault code something like (Immo Not Programmed)....That means this dash is already Reset and its ready to program to other vehicle or, can start any vehicle without even adapting it to the vehicle......

[dave1982]

Hello,
i'm looking for someone who can readout or change the pin from my dashboard dump.
when i look in eeprom menu it shows FFFF.
and i'm not able to program it.

Try resetting then program you using opcom to program ?

i-m using opcom.
its not possible to reset.
when i try to reset, it ask for the pin.
its not possible to enter FFFF.
and then i try to enter my original pin it shows "Reset failed"

---

If you find its FFFF means the dash is not programmed to this vehicle and you should have a fault code something like (Immo Not Programmed)....That means this dash is already Reset and its ready to program to other vehicle or, can start any vehicle without even adapting it to the vehicle......

exactly.
fault codes are immo or vin (sorry, dont know now) and pin not programmed
but i can not program the dash.
programming other modules works fine so i think its not the problem with my opcom.
my problem is that the car wont start

[Ashraf6119]

Hello,
i'm looking for someone who can readout or change the pin from my dashboard dump.
when i look in eeprom menu it shows FFFF.
and i'm not able to program it.

Try resetting then program you using opcom to program ?

i-m using opcom.
its not possible to reset.
when i try to reset, it ask for the pin.
its not possible to enter FFFF.
and then i try to enter my original pin it shows "Reset failed"

Your Op-Com can also read the pin code so double check as i told you in my first post.also check the security lock time it must be activated as you have put wrong pin codes few times so, live the ignition ON for the time showing in your Op-Com....

Can tell us what is the problem with this vehicle.........?

[dave1982]

Hello,
i'm looking for someone who can readout or change the pin from my dashboard dump.
when i look in eeprom menu it shows FFFF.
and i'm not able to program it.

Try resetting then program you using opcom to program ?

i-m using opcom.
its not possible to reset.
when i try to reset, it ask for the pin.
its not possible to enter FFFF.
and then i try to enter my original pin it shows "Reset failed"

Your Op-Com can also read the pin code so double check as i told you in my first post.also check the security lock time it must be activated as you have put wrong pin codes few times so, live the ignition ON for the time showing in your Op-Com....

Can tell us what is the problem with this vehicle.........?

the problem is that the car wont start it shows the "F" in dash
in eeprom menu from opcom the dash pin is "FFFF"
its not possible to reset or program the dash.

i also have a small problem with the BCM.
programming and coding works without problems, but i have fault code:
B3058 - (0) Vehicle ID Not Programmed - Present
have tried to programm it in other car (Corsa C) and it works without faultcode.
but then i reset it and programm it in my meriva the fault code came back.

[Ashraf6119]

Hello,
i'm looking for someone who can readout or change the pin from my dashboard dump.
when i look in eeprom menu it shows FFFF.
and i'm not able to program it.

Try resetting then program you using opcom to program ?

i-m using opcom.
its not possible to reset.
when i try to reset, it ask for the pin.
its not possible to enter FFFF.
and then i try to enter my original pin it shows "Reset failed"

Your Op-Com can also read the pin code so double check as i told you in my first post.also check the security lock time it must be activated as you have put wrong pin codes few times so, live the ignition ON for the time showing in your Op-Com....

Can tell us what is the problem with this vehicle.........?

the problem is that the car wont start it shows the "F" in dash
in eeprom menu from opcom the dash pin is "FFFF"
its not possible to reset or program the dash.

i also have a small problem with the BCM.
programming and coding works without problems, but i have fault code:
B3058 - (0) Vehicle ID Not Programmed - Present
have tried to programm it in other car (Corsa C) and it works without faultcode.
but then i reset it and programm it in my meriva the fault code came back.

When you say you have (F) showing on your dash means is this vehicle Automatic....?

[dave1982]

I think i have a other problem with this car.
i got a lot of faultcodes in my easytronic ECU
i think im in the wrong place, but maybe someone here can help me.
i got these codes:
P0725 - (4) Engine Speed Signal CAN-BUS Malfunction - Present
P0505 - (4) Idle Speed Signal CAN-BUS Malfunction - Present
P1895 - (4) Engine Torque Signal CAN-BUS Malfunction - Present
P1896 - (4) Eingine Torque Request CAN-BUS Malfunction - Present
P1120 - (4) Accelerator Pedal Position CAN-BUS Malfunction - Present
P1703 - (4) Brake Light Switch CAN-BUS Malfunction - Present
U2105 - (4) CAN-BUS no Communication with ECM (Engine Controle Module) - Present
P0110 - (4) Intake Air Temperature CAN-BUS Malfunction - Present
P0115 - (4) Engine Coolant Temperature CAN-BUS Malfunction - Present

---

Try resetting then program you using opcom to program ?

i-m using opcom.
its not possible to reset.
when i try to reset, it ask for the pin.
its not possible to enter FFFF.
and then i try to enter my original pin it shows "Reset failed"

Your Op-Com can also read the pin code so double check as i told you in my first post.also check the security lock time it must be activated as you have put wrong pin codes few times so, live the ignition ON for the time showing in your Op-Com....

Can tell us what is the problem with this vehicle.........?

the problem is that the car wont start it shows the "F" in dash
in eeprom menu from opcom the dash pin is "FFFF"
its not possible to reset or program the dash.

i also have a small problem with the BCM.
programming and coding works without problems, but i have fault code:
B3058 - (0) Vehicle ID Not Programmed - Present
have tried to programm it in other car (Corsa C) and it works without faultcode.
but then i reset it and programm it in my meriva the fault code came back.

When you say you have (F) showing on your dash means is this vehicle Automatic....?

yes, its easytronic
and yes i looked for the security time, it was off (or not present)

[raffy haddad]

Hello
My brother have the same car
And have same problem
And gave us a head illness
The problem was the brake lamp
Where burn and the brake pedal switch was not in place
And even when you change them you must clear fault code to start and to f letter go away
Even the dealer says that the easytronic ecu must be replaced
Only the problem was in brake pedal switch
And brake lamp was burn
And fvdi read almost the same troubles that you have
F letter in dask means something wrong in car it can not start
Regards

[Ashraf6119]

Hello
My brother have the same car
And have same problem
And gave us a head illness
The problem was the brake lamp
Where burn and the brake pedal switch was not in place
And even when you change them you must clear fault code to start and to f letter go away
Even the dealer says that the easytronic ecu must be replaced
Only the problem was in brake pedal switch
And brake lamp was burn
And fvdi read almost the same troubles that you have
F letter in dask means something wrong in car it can not start
Regards

Yes I do agree with this post fix the brake light switch fault first and go from there