Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ BMW E64 disabling active steering
17-04-2018, 09:59 AM,
Post: #21
|
|||
|
|||
RE: [SOLVED] BMW E64 disabling active steering
(17-04-2018, 08:25 AM)alfio76 Wrote: ok, I just have error dsc as soon as I have time I try the programming in expert mode of the dsc, I downloaded from google a manual for programming in expert mode and make the example with the engine control unit that also requested the 0da file for this I thought I needed it. I think I used the same pdf. DSC doesn’t have this file so you only do prog. Program. So you successfully removed active steering? BMW Coding Programming Retrofitting
Mercedes Benz Coding Retrofitting Online help by TeamViewer CID Changeable SD cards! 100% working! |
|||
17-04-2018, 17:38 PM,
Post: #22
|
|||
|
|||
RE: [SOLVED] BMW E64 disabling active steering
SOLVED - i have flashing the dsc in expert mode with WINFKP and the dsc have delete the error. totally solved
|
|||
18-04-2018, 19:01 PM,
(This post was last modified: 18-04-2018, 19:01 PM by Silva1337.)
Post: #23
|
|||
|
|||
RE: [SOLVED] BMW E64 disabling active steering
|
|||
18-04-2018, 22:28 PM,
Post: #24
|
|||
|
|||
RE: [SOLVED] BMW E64 disabling active steering
(18-04-2018, 19:01 PM)Silva1337 Wrote:(17-04-2018, 17:38 PM)alfio76 Wrote: SOLVED - i have flashing the dsc in expert mode with WINFKP and the dsc have delete the error. totally solved yes It would be fine if explane how did you suces..change coding in kombi szl and flash dsc with DSC60 softwere?corect?remove fuse in glove box..etc |
|||
19-04-2018, 20:31 PM,
Post: #25
|
|||
|
|||
RE: [SOLVED] BMW E64 disabling active steering
for me its all clear only how to with expert mode what to choose
it should look like this, you take out fuse, make correct vo, flash dsc and code on empty required modules and maybe steering angle intilization |
|||
20-04-2018, 08:00 AM,
Post: #26
|
|||
|
|||
RE: [SOLVED] BMW E64 disabling active steering
Post #14, #17.
Remove fuse, remove $217 from FA, code szl, sgm, KOMBI. Then read KOMBI, change any AFS_ aktivesteering etc to nicht_aktiv, code it. Then program DSC with software without aktive steering and do steering angle adjustment. That’s all. BMW Coding Programming Retrofitting
Mercedes Benz Coding Retrofitting Online help by TeamViewer CID Changeable SD cards! 100% working! |
|||
Reputation: +2 - rs@chip [+1] , atomantmk [+1] | |||
20-04-2018, 18:44 PM,
Post: #27
|
|||
|
|||
RE: [SOLVED] BMW E64 disabling active steering
you must use winkfp in exper mode, for reprogramming dsc
|
|||
21-04-2018, 15:19 PM,
Post: #28
|
|||
|
|||
RE: [SOLVED] BMW E64 disabling active steering
Can you send me your skype help meeded
|
|||
24-04-2018, 09:22 AM,
Post: #29
|
|||
|
|||
RE: [SOLVED] BMW E64 disabling active steering
(20-04-2018, 08:00 AM)kmodel99 Wrote: Post #14, #17. I flashed DSC expert mode with no problem..change codings,fuse etc...but final step steering adjustment failed no mater what I do..variate speed,10°each side..made all acording ista but no goo..... sensor reset sucesful,initialization failed(not posible) stuck here |
|||
24-04-2018, 09:28 AM,
(This post was last modified: 24-04-2018, 09:28 AM by kmodel99.)
Post: #30
|
|||
|
|||
RE: [SOLVED] BMW E64 disabling active steering
(24-04-2018, 09:22 AM)rs@chip Wrote:(20-04-2018, 08:00 AM)kmodel99 Wrote: Post #14, #17. To do steering adjustment remove 217 from fa and save to all modules which save FA. Because ista see that you have active steering and want to do steering angle initialisation like with AFS. Steering angle without AFS is just setting straight ahead position. EDIT: check in ista in vehicle details does there is 217 code. It should be. BMW Coding Programming Retrofitting
Mercedes Benz Coding Retrofitting Online help by TeamViewer CID Changeable SD cards! 100% working! |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content