Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
HU_entrynav flash fail
06-05-2018, 17:49 PM,
(This post was last modified: 07-05-2018, 06:16 AM by BimmerSLO.)
Post: #1
|
|||
|
|||
HU_entrynav flash fail
Hi all
I retrofitted a hu_entrynav into a f10 2014. The unit was not coded, did not have cafd and I couldnt get detect caf to work. I then tried to flash the entrynav to latest i-step, but flash failed just when it started FinaliseECUFlash. There is an error that it could not check prerequsities or dependencies. I then also flashed zgw2 since entrynav had it under prerequisities and tried again. Same result. Log: Headunit is now in bootloader mode blFlash finished successfully. swDeploy FinishedwithError, cdDeploy and ibaDeploy not executable |
|||
06-05-2018, 18:20 PM,
Post: #2
|
|||
|
|||
RE: HU_entrynav flash fail
Post pic of svt target
|
|||
06-05-2018, 19:12 PM,
(This post was last modified: 06-05-2018, 19:54 PM by BimmerSLO.)
Post: #3
|
|||
|
|||
RE: HU_entrynav flash fail
link in attachement
If someone is willing to remote code, he can contact me. But please, only high experienced coders. |