Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Retrofit RDC on F20 but function no work
09-07-2018, 10:38 AM,
Post: #1
|
|||
|
|||
Retrofit RDC on F20 but function no work
Hello,
Can someone give me advice which step or process I missing to follow up, so far the RDC function has been coding and panel be able display RDC function but the message show that progress pending on RDC sensor reset, after I tried to reset that then panel no progress bar show progress and sensor unable to get reset. VIN:E927446 RDC kit: RDC antenna*1 / RDC Wheel sensor*4 Thanks |
|||
09-07-2018, 11:06 AM,
Post: #2
|
|||
|
|||
RE: Retrofit RDC on F20 but function no work
maybe you need pairing with istad
Please, Press the Buttons and if This post help or is usefull for you! Not is needed write just only thanks in Threads
|
|||
09-07-2018, 12:29 PM,
Post: #3
|
|||
|
|||
RE: Retrofit RDC on F20 but function no work
Have you use the correct RDC wheel sensor? Most people failed RDC retrofit in my area due to mislead by seller, the sell them RDCi sensor, which is cheaper but incompatible with RDC.
the RDC/RDCi sensor on F20 do not need to be pairing. |
|||
09-07-2018, 12:42 PM,
Post: #4
|
|||
|
|||
RE: Retrofit RDC on F20 but function no work
Check wiring, check on esys if in READ_ECU is present RDC.
Anyway with coding, display show reset, instead with correct wiring and no coding display show RDC fault BMW F10 530d 0911
Retrofit 223 245 248 2VB 2ND 316 337 4M5 416 ->451/488-->456 453 465 494 496 552 5AD 5AE 5AG NBT 654 FM2 610 620[CIC] 688 6NR 6WA & 6WB715 760 8TH-KAFAS2-FSC KeyFOB Mperformance Gxx Series |
|||
09-07-2018, 13:30 PM,
Post: #5
|
|||
|
|||
RE: Retrofit RDC on F20 but function no work
If wiring is ok then you have the wrong wheel speed sensors.
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
09-07-2018, 14:12 PM,
Post: #6
|
|||
|
|||
RE: Retrofit RDC on F20 but function no work
(09-07-2018, 12:29 PM)simonchs Wrote: Have you use the correct RDC wheel sensor? Most people failed RDC retrofit in my area due to mislead by seller, the sell them RDCi sensor, which is cheaper but incompatible with RDC. here are current install hw information following list RDC antenna : 6851214 RDC sensor: 6790054 let me know if I install wrong HW on F20. Thanks (09-07-2018, 13:30 PM)Fx82 Wrote: If wiring is ok then you have the wrong wheel speed sensors. no idea what happening on there. https://cartechnology.co.uk/images/smilies/fail.gif (09-07-2018, 12:42 PM)BMWzone Wrote: Check wiring, check on esys if in READ_ECU is present RDC. right now the F20 not near my side, I will double check that over weekend. the circuit on RDC is petty simple with total 4 pins, CAN*2/PWR*1 GND*1, and CAN connect to FEM shown on ISTA, I was follow that to connected, only different is power need connected to fuse box, I checked there didn't found same fuse and I just connect to other power line, the problem is panel be able to show psi and temperature but value is empty also I tried reset RDC sensor but no work so far. Thanks |
|||
09-07-2018, 19:17 PM,
Post: #7
|
|||
|
|||
RE: Retrofit RDC on F20 but function no work
(09-07-2018, 14:12 PM)hhc4431441 Wrote: right now the F20 not near my side, I will double check that over weekend. the circuit on RDC is petty simple with total 4 pins, CAN*2/PWR*1 GND*1, and CAN connect to FEM shown on ISTA, I was follow that to connected, only different is power need connected to fuse box, I checked there didn't found same fuse and I just connect to other power line, the problem is panel be able to show psi and temperature but value is empty also I tried reset RDC sensor but no work so far. Thanks I guess : -It's required use original KCAN Cables -Do you have mounted sensors in Wheels or no ??? If no, it's impossible to show parameters, sensors have automatic power on at determined PSI BMW F10 530d 0911
Retrofit 223 245 248 2VB 2ND 316 337 4M5 416 ->451/488-->456 453 465 494 496 552 5AD 5AE 5AG NBT 654 FM2 610 620[CIC] 688 6NR 6WA & 6WB715 760 8TH-KAFAS2-FSC KeyFOB Mperformance Gxx Series |
|||
10-07-2018, 04:14 AM,
Post: #8
|
|||
|
|||
RE: Retrofit RDC on F20 but function no work
(09-07-2018, 19:17 PM)BMWzone Wrote:(09-07-2018, 14:12 PM)hhc4431441 Wrote: right now the F20 not near my side, I will double check that over weekend. the circuit on RDC is petty simple with total 4 pins, CAN*2/PWR*1 GND*1, and CAN connect to FEM shown on ISTA, I was follow that to connected, only different is power need connected to fuse box, I checked there didn't found same fuse and I just connect to other power line, the problem is panel be able to show psi and temperature but value is empty also I tried reset RDC sensor but no work so far. Thanks The attached photo(all kit in Box) is old version, when I install then I have switch kcan type cable, in the meantime no concern on RDC sensor since all kit has been installed then I going to coding and figure that issue. |
|||
10-07-2018, 20:20 PM,
Post: #9
|
|||
|
|||
RE: Retrofit RDC on F20 but function no work
After a quick search with ETK, I am afraid you are using both wrong control unit and sensor. The p/n you provided are for F0x/F1x, but not for F2x/F3x.
(09-07-2018, 14:12 PM)hhc4431441 Wrote:(09-07-2018, 12:29 PM)simonchs Wrote: Have you use the correct RDC wheel sensor? Most people failed RDC retrofit in my area due to mislead by seller, the sell them RDCi sensor, which is cheaper but incompatible with RDC. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content