Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Urgent!!! Need Eeprom Clio II
27-11-2013, 21:35 PM,
(This post was last modified: 29-11-2013, 13:12 PM by volavka.)
Post: #1
|
|||
|
|||
Urgent!!! Need Eeprom Clio II
Need original eeprom for Clio II 1.5dci Ecu Delphi DDCR Trw. (with CAN-Bus)
I do immo off with emulator (Carlabimmo emulator) and now the car start but not increase revolutions. In Ecu have DTC DF001 Inyector not programed, computer (i think the eprom is corrupt) I already try to code inyector with Wurth Wow and the codes are aceppted, but i have same DTC and the car not increase revolutions. |
|||
27-11-2013, 22:07 PM,
Post: #2
|
|||
|
|||
RE: Urgent!!! Need Eeprom Clio II
Try reprogramming the injectors with clip mate then it should rev
and do one injector at a time some wont accept injector codes all at once |
|||
28-11-2013, 00:48 AM,
Post: #3
|
|||
|
|||
RE: Urgent!!! Need Eeprom Clio II
(27-11-2013, 22:07 PM)racin-snake Wrote: Try reprogramming the injectors with clip mate then it should revI think is problem of eeprom... when i do immo off, the ecu plastic case already are cut, then i think eprom was modified for someone that try immo off before me. I upload the 95080 dump file to someone see that, and confirm if this are corrupt |