[Stromag]

Hello,

I go back to my trimmed CAFD issue in BDC_BODY2. I've tried to change Java to 64-bit, increase memory in Launcher, disable some KIS entries, but the problem persists. I can not get an answer for TokenMaster, so at the moment I only have access to Launcher PRO 2.

The CAFD file mentioned by me is attached to this article. Could someone please check if it's possible to open them and read all the names correctly? And hopefully I can find a reason why I can not read values in this module while others can read correctly (at least the ones I've tried)?

Many Thanks.[attachment=83412]
[/Zitat]

[sqorpius]

No problem, CAFD works

[MicRofT]

Hmmm...

Which version of PSdZdata are You using?

[Stromag]

Hmmm...

Which version of PSdZdata are You using?

4.15.12

[MicRofT]

I tried with 3 different PSdZdata versions, both lite and full (normally I use folder link to Rheingold data_swi directory), but each time I am getting the same error in CAFDTool with this particular CAFD file.

[masa52]

use esys fdl to open file!

[Almaretto]

Hello,

I am going back to my trimmed CAFD problem in BDC_BODY2. I tried to change Java to 64-bit, increase memory in Launcher, disable some KIS entries, but the problem still persists. I cannot get a reply for TokenMaster so for now I only have access to Launcher PRO 2.

The CAFD file I mentioned is attached to this post. Could someone please check if it is possible to open it and read all the names properly? And hopefully help me find a reason why I cannot read values in this module, while others can be read properly (at least the ones I tried)?

Thanks.

If you can read 17BC then mapping is the same. 

Reads fine in 3.2.1. Unampped in 2.9.15.

PSdZData version makes no difference as all after 3.54.1 are unmapped and Launcher Provides descriptions.

[MicRofT]

So maybe the reason is that Launcher Pro v2 doesn't have descriptions for this CAFD file?

[Almaretto]

So maybe the reason is that Launcher Pro v2 doesn't have descriptions for this CAFD file?

Correct.

[Fatalix]

Hey 

Im dealing with a G30 with a couple of different coding wishes.

Is it possible to change the actual color of the car in the iDrive? As the current is black, and the actual car is white? 

Video in Motion coding. As far as i have understood it is currently locked to 63kph as far as it is coded active. Is there no way to activate this to unlimited kph? Using SPEEDLOCK_SPEEDVALUE would only make it available up to 63kph.

Start up in Adaptive Drive mode, is this possible instead of the standard Comfort mode? 

DRL lights active front and rear in the daytime. Is this possible to enable? As far as i can read SA8TL does not appeal to G series. 

Thanks alot! 

Not that I am aware.

Speed is locked by bitmask, preventing higher than 3F = 63 kph.

Yes in BDC Body.

No.

What is the parameter for adaptive drive startup, or remember last mode at startup?