[dantools]

Hello i have and Old cim need to replace with new one
But on new one i Can find eeprom 
But on old one dosent seems to have that eeprom 

Any who knows?

[snyper]

Then don't you think they are different then?

[dil6222]

Looks to me like chip missing on second photo it's meant to be there you can see where someone has removed and not cleaned the pins look at the blobs of solder on the pads. If it wasn't meant to be there on that particular cim the pins would be clean

[dantools]

There is nothing renoved car can drive with Old cim.
And the new one is original from Opel so IT must be new model

But its wired there is No 95160 eeprom

---

Is it beacause the eeprom is in mc9s12 chip?

[dil6222]

There is nothing renoved car can drive with Old cim.
And the new one is original from Opel so IT must be new model

But its wired there is No 95160 eeprom

---

Is it beacause the eeprom is in mc9s12 chip?

Yes mcs912 has eeprom that's the chip you should be reading.

Get the pin then reset cim and code everything with opcom

[dantools]

I have pin from ecu

Tried learn brand new cim
Reset ECU and learn cim and ECU. And learned the old keys

Car still dont start

[ilkovelichkov]

You have to reset and learn IPC UEC REC too

[dil6222]

Read all units for faults codes after you have done what ilkovelichkov has suggested if any faults post here and I will help

[snyper]

Can i burge in on this thread, or should i start a new one? I have a similar problem with an Astra H. Keys lost, tried programming after resetting the CIM, but no joy. Try resetting the ECU says no password programmed. How possible is that?

[djole3113]

If you need key programming only, you shouldn"t reset CIM or ECU.