[KillerBeePT]

Hi!

Been looking around for this for a couple of days and the only thing I found about it was 2 videos showing it working, but nothing more than that. Does any one have a list or can point me to a place that has the information on the parts that need to be installed and what coding needs to be done?

Thanks!

[sguzzel]

Hi!

Been looking around for this for a couple of days and the only thing I found about it was 2 videos showing it working, but nothing more than that. Does any one have a list or can point me to a place that has the information on the parts that need to be installed and what coding needs to be done?

Thanks!

Hi,

the two videos got my attention too.
As I found out, you need several things vor ACC:
- DSC (with ACC, possiblly with Parking Assist (+) it works too, sadly I don't have it as I only have standard PDC and Driving Assistant non plus)
- SAS (ECU, inside Car, left in Front of the driver seat, present if you have parking assistant+ (?))
- ACC Sensor (ECU is integrated), in front of the grill
- Grill for ACC sensor, Wires, etc
- Buttons for Wheel
- nut sure if one needs a new BDC
- Coding
- Calibration of ACC



Part no for my g31 for Retrofit
Gitter Lufteinlass Mitte FRR 51117385258
Träger Stossfänger vorn unten 51117418224
Frontradarsensor Fernbereich 66316892575
Radom 66316877219
Halter Sensor 66316873401
Torx-Schraube mit Scheibe 7149144003
Blindniet 7149191219
Wire From ACC To car Inside (see TIS)
Wire to SAS (not sure if wire is present, see TIS)
Steuergerät SAS 34509500018
Hydroaggregat & Steuergerät DSC /DXC
Schalter Multifunktionslenkrad 61319327081

As I don't want to mess around with the braking system (DSC) it is no option for me to retrofit it by myself. A germany company (bimmer-manufaktur) offers the retrofit for around 5.000€, so it is possible but makes no economical sense to me.

Hope I could help a bit.

Regards

[KillerBeePT]

Hi,

the two videos got my attention too.
As I found out, you need several things vor ACC:
- DSC (with ACC, possiblly with Parking Assist (+) it works too, sadly I don't have it as I only have standard PDC and Driving Assistant non plus)
- SAS (ECU, inside Car, left in Front of the driver seat, present if you have parking assistant+ (?))
- ACC Sensor (ECU is integrated), in front of the grill
- Grill for ACC sensor, Wires, etc
- Buttons for Wheel
- nut sure if one needs a new BDC
- Coding
- Calibration of ACC



Part no for my g31 for Retrofit
Gitter Lufteinlass Mitte FRR 51117385258
Träger Stossfänger vorn unten 51117418224
Frontradarsensor Fernbereich 66316892575
Radom 66316877219
Halter Sensor 66316873401
Torx-Schraube mit Scheibe 7149144003
Blindniet 7149191219
Wire From ACC To car Inside (see TIS)
Wire to SAS (not sure if wire is present, see TIS)
Steuergerät SAS 34509500018
Hydroaggregat & Steuergerät DSC /DXC
Schalter Multifunktionslenkrad 61319327081

As I don't want to mess around with the braking system (DSC) it is no option for me to retrofit it by myself. A germany company (bimmer-manufaktur) offers the retrofit for around 5.000€, so it is possible but makes no economical sense to me.

Hope I could help a bit.

Regards

Actually you information was very useful since there isn't any anywhere else around, at least that I could find.
So yeah, thanks! 
I will probably still look around on TIS and ETK to see if I can get it to work, if no one else has some new information, and if yes, I share my experience so that everybody else can see it.

[sguzzel]

Currently there Is a "retrofit" kit at Ebay Germany (around 1k and not from me), but without cables.

Last week I did a HW-Tal Calculation and as I pointed out DSC and SAS are the wrong/missing ECUs of my current setup. From my point with 5AS I will change directly to 5AT (additional Radar/left right+harness & new steering wheel) as soon as my warranty expires (still got ~1y).