Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Bench Coding - Need help on required components
24-06-2019, 17:10 PM,
Post: #1
|
|||
|
|||
Bench Coding - Need help on required components
I've long been thinking on setting up coding on bench, just never had time to look into it. I have NBT, CID, KOMBI, IHKA, TBX, ZBE and emulator. I can put all these things together, but I know the whole thing would not power up until I add the required components.
What other parts do I need? FEM? Can someone point me in the right direction, links, stuff to buy (eBay or parts ID), wiring diagram...etc. Just wanna try a few things quickly. Thanks in advance |
|||
24-06-2019, 17:40 PM,
Post: #2
|
|||
|
|||
RE: Bench Coding - Need help on required components
(24-06-2019, 17:10 PM)TokenMaster Wrote: I've long been thinking on setting up coding on bench, just never had time to look into it. I have NBT, CID, KOMBI, IHKA, TBX, ZBE and emulator. I can put all these things together, but I know the whole thing would not power up until I add the required components. hi i found some things out please let me know please how you geton thank you https://www.ebay.co.uk/itm/BMW-NBT-NBT-E...2940715683 |
|||
24-06-2019, 18:14 PM,
Post: #3
|
|||
|
|||
RE: Bench Coding - Need help on required components
(24-06-2019, 17:10 PM)TokenMaster Wrote: I've long been thinking on setting up coding on bench, just never had time to look into it. I have NBT, CID, KOMBI, IHKA, TBX, ZBE and emulator. I can put all these things together, but I know the whole thing would not power up until I add the required components. ZGW |
|||
24-06-2019, 18:16 PM,
Post: #4
|
|||
|
|||
RE: Bench Coding - Need help on required components
(24-06-2019, 17:40 PM)kuldip1 Wrote:(24-06-2019, 17:10 PM)TokenMaster Wrote: I've long been thinking on setting up coding on bench, just never had time to look into it. I have NBT, CID, KOMBI, IHKA, TBX, ZBE and emulator. I can put all these things together, but I know the whole thing would not power up until I add the required components. Yes the wiring it's required; all that ecu are enough to do a lot of test. |
|||
24-06-2019, 18:52 PM,
(This post was last modified: 24-06-2019, 19:03 PM by simzep.)
Post: #5
|
|||
|
|||
RE: Bench Coding - Need help on required components
I'm in the process of doing the same atm.
You need a can adapter and send two messages ten times a second with 500k and don't forget the 120Ohm termination on both sides: Code: static tCAN message1; I'm using a SparkFun Can shield on an ardiuino. If you want to flash you will need a zgw/zgw preferred 4sk or 8sk (Important: Change the ZGW vin to the desired NBT vin or it will lock.) As a PSU just get an old PC Power Supply all components use 12V anyways. Just get a quadlock extension like this and cut it for the main connection. Interesting links and part numbers in no particular order: Code: http://www.bmw-etk.info/teile-katalog/prd/BMW/VT/P/F01/Lim/740dX/ECE/L/A/2011/01/52541/61/61_2350/61359322532 ZGW connectors OABR to ATM wiring Code: OABR socket: |
|||
Reputation: +1 - gpdriver [+1] | |||
24-06-2019, 19:00 PM,
Post: #6
|
|||
|
|||
RE: Bench Coding - Need help on required components
(24-06-2019, 18:52 PM)simzep Wrote: I'm in the process of doing the same atm. In my ZGW is a different VIN than in the NBT. And it was never locked |
|||
24-06-2019, 19:04 PM,
Post: #7
|
|||
|
|||
RE: Bench Coding - Need help on required components
|
|||
24-06-2019, 19:10 PM,
Post: #8
|
|||
|
|||
RE: Bench Coding - Need help on required components
I have a PSU ready to use. I'm not planning on flashing immediately, but it's not out of the realm of possibilities, as I do have a broken NBT somewhere.
I do have a ZGW-02 8SK, but I think it's broken, so will source out a new one. I was given a part# 9284421 for ZGW-02 MId. so, I have to dabble with CAN messages. I think I can manage that with with USB-CAN or even ELM, or maybe not. I'm just thinking of possible solution at this time. Thanks for everyone's help, so far. Please keep 'em coming, if there's anything more to learn |
|||
24-06-2019, 19:18 PM,
Post: #9
|
|||
|
|||
RE: Bench Coding - Need help on required components
|
|||
24-06-2019, 19:30 PM,
Post: #10
|
|||
|
|||
RE: Bench Coding - Need help on required components
For ignition You need CAS or FEM or CANbridge module , other parts You have..
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
BMW E71 EGS coding 8HP70 used | BS68 | 4 | 212 |
04-05-2024, 18:08 PM Last Post: Ryzen |
|
F25 5AS,8th and 5AC coding with 6wb kombi | simplextibi | 1 | 63 |
04-05-2024, 06:37 AM Last Post: Stratofortress |
|
Bmw explorer msd80 isn read out bench? | xMoses | 9 | 757 |
30-04-2024, 01:07 AM Last Post: that4chanhacker |
|
Bmw F34 trailer hitch coding ? | Cryjack | 2 | 83 |
27-04-2024, 20:27 PM Last Post: dumitru.o |
|
F20 LCI2 black panel cluster coding | sqorpius | 10 | 2,118 |
27-04-2024, 06:51 AM Last Post: hamzettin |
|
FDL coding BMW Apps | Mugga | 3 | 229 |
26-04-2024, 18:06 PM Last Post: Mugga |
|
Coding a F80 M3 race car | PeterY | 10 | 592 |
25-04-2024, 23:32 PM Last Post: Furgus |
|
NBT Evo CAFD missing after coding error | Mugga | 13 | 635 |
24-04-2024, 22:47 PM Last Post: Mugga |
|
6wb cluster swap and coding | xMoses | 4 | 271 |
22-04-2024, 19:07 PM Last Post: NikolaIMRS |
|
MGU Bench connection | kimz | 4 | 523 |
22-04-2024, 17:06 PM Last Post: kimz |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content