Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Vediamo 04.02.02 PassThru guide
30-04-2019, 15:38 PM,
(This post was last modified: 02-05-2019, 22:32 PM by ACloneHasNoName.)
Post: #1
|
|||
|
|||
Vediamo 04.02.02 PassThru guide
Today I have successfully connected to my MY 2011 R172, with Vediamo and VAS5054A with OKI chip, on Windows 10 x64.
I have also managed to flash some control units using this method. The following steps have been taken to enable PassThru in Vediamo: - Look for the file "c:\program files (x86)\vediamo\caesar\drivers\slave.ini" - Open it in notepad, and search for the following part: "PartJ configuration" - Below this line, you will see a parameter "DeviceName" - Set the value of this parameter to "Softing - VAS5054A#082145725" - Chinese clones of VAS will share the same serial number (082145725). If yours is different, make sure to set the correct serial number. - Open Vediamo Start Center - In the Vediamo Server - CAESAR - click on Update, a menu will show up. - Make sure "Part J" is checked, then click Update to close the menu - Now, when you connect your PC with VAS, the Vediamo Server part will show a connected device, and this is how you know you configured everything correctly. In order to be able to connect to the control unit, using the descriptor files, you must use connection type UDS_500. In order to set this, you must go to ECU properties, where you will see that the connection, by default, is LSCAN_UDS_125. Go ahead, and change it to HSCAN_UDF_500, otherwise, when connecting to the control unit, you will get either a Timeout error, or an Unknown error. Enjoy! Useful links: VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64 https://cartechnology.co.uk/showthread.php?tid=42373 Vediamo (descriptor, cbf) files 100 gb with some video tutorials https://cartechnology.co.uk/showthread.php?tid=35497 Does Vediamo work with Vas5054? https://cartechnology.co.uk/showthread.php?tid=44150 Full vediamo 4.02.02 https://cartechnology.co.uk/showthread.php?tid=30955 VEDIAMO 04.02.02 FIX FOR PROGRAM ACTIVATION https://cartechnology.co.uk/showthread.php?tid=44133 |
|||
Reputation: +5 - byasha [+1] , wellwell [+1] , McMihai [+1] , andorkala [+1] , paino [+1] | |||
30-04-2019, 20:08 PM,
Post: #2
|
|||
|
|||
RE: Vediamo 04.02.02 PassThru guide
Yes, Persona explain it here, post 4
https://cartechnology.co.uk/showthread.php?pid=407741 W223 W206
Xentry Ecom/C6/Sd C4 Help HHT native on 64x windows WIS 2021 AMG Menu Anti-Theft Pin Navigation Map Pin |
|||
02-05-2019, 22:25 PM,
(This post was last modified: 02-05-2019, 22:54 PM by ACloneHasNoName.)
Post: #3
|
|||
|
|||
RE: Vediamo 04.02.02 PassThru guide
(30-04-2019, 20:08 PM)ross2018 Wrote: Yes, Persona explain it here, post 4 Sure, his name is pesona. I felt a dedicated thread, with complete information is necessary, and useful (due to my personal experience and troubles installing Vediamo). Enjoy! |
|||
01-02-2022, 15:48 PM,
Post: #4
|
|||
|
|||
RE: Vediamo 04.02.02 PassThru guide
hi
how i get vediamo work to kts xentry pass 2021/12works well thanks |
|||
01-02-2022, 16:32 PM,
Post: #5
|
|||
|
|||
RE: Vediamo 04.02.02 PassThru guide
(01-02-2022, 15:48 PM)casper1986 Wrote: hi If you want I can try it by remote access |
|||
02-02-2022, 18:24 PM,
Post: #6
|
|||
|
|||
RE: Vediamo 04.02.02 PassThru guide
|
|||
02-02-2022, 18:50 PM,
Post: #7
|
|||
|
|||
RE: Vediamo 04.02.02 PassThru guide
While we are discussing 4.02.02 and Part J, I am curious if anyone else has attempted running the same configuration with 4.02.02 with a PassThru device on Windows 11 Enterprise?
Thus far, I have had no success. Vediamo will not discover the Part J device. I am starting to believe it is a Windows 11 -specific issue as Windows 10 Enterprise 21H2 works fine with it. |
|||
02-02-2022, 19:06 PM,
(This post was last modified: 02-02-2022, 23:55 PM by Clusters.)
Post: #8
|
|||
|
|||
RE: Vediamo 04.02.02 PassThru guide
What i do.
A: 1. install vediamo 2. copy crack file to vediamo install folder (2/3 file ) 3. use keygen 4. do everything that is written in the installation tutorial (makes life easier) now vediamo works B: 1. passtrue what soft you use i use kts 540 install ( bosch home page kts passtrue driver ) or use vas5054a 2. use regedit Computer\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\PassThruSupport.04.04 now you see your passtrue ( Softing - VAS5054A#082145725 ) (click rename and copy all ) 3. now open C: program file x86 /vediamo/ caesar / driver 4. use notebook and open slave.ini 5 find part line j devicename (and set your passtrue) Softing - VAS5054A#082145725 |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content