Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
REPAIR ERASED OP-COM CLONE BOOTLOADER FROM PIC18F458 MCU
10-07-2014, 13:46 PM,
Post: #1
|
|||
|
|||
REPAIR ERASED OP-COM CLONE BOOTLOADER FROM PIC18F458 MCU
Since i have seen that ppl try to use newer op-com versions to their china cloned interface and a lot of them have bricked them i have made a tutorial on how to restore it by USB and not with a programmer.
Remember this is for PIC MCU not for FTDI chip (that can be flashed with MPROG). Also i have modified the original kit of op-com 2012 december with the licence emulator from VAUX-COM 20120309a for you to test. I would have done it myself but since i do not own a clone op-com interface i can't do that. Also if it's not working with your clone v5 and let's say the worse will happen you have also the solution to restore it. The install kits that i have made are from original installers version 121231 h or i in English,Romanian,German and please always run them as Administrator only on V5 Clone (right click on created shortcut, properties, compatibility tab and put the mark on Run this program as an Administrator on Windows 7). If you are willing please test them on cars not blank and these kits should upgrade your interface to FW 1.47 when you test in blank or connected to a car let's say x vehicle identification. Please provide feedback on what version you have tested, witch car, if it's ok or not and always run them as Administrator. If you like my post and it helped you please press THANKS. P.S. If you post test info and it's ok, i will post other versions modified for testing. I think that 3 languages are ok as a first test. Please excuse me in first version of kits i have not included an icon to op-com shortcut, i have modded the loader with icon and now it's ok. You can find these modded version on same address also remember to run them as administrator. |