Possibly Related Threads…

***vld*** · 21-04-2022, 20:10 PM,

Hello, I have an ICOM NEXT original that can't read E83 3.0d '06, why is this due to the fact that there is no support for the K line? I used to have an ICOM A2 clone and I never had to build a bridge between 7 and 8 pins and now ICOM NEXT did not want to read any module and did not identify the car at all until I made a 7 and 8 pin bridge.

Do you have any idea why this is so?
The firmware of ICOM NEX is FW_03-15-08
ISTA Standalone 4.34.4x

Any help will be helpful.

***Bimmer540*** · 21-04-2022, 20:18 PM,

Can you post picture from itoolradar fw next

***vld*** · 21-04-2022, 20:26 PM,

(21-04-2022, 20:18 PM)Bimmer540 Wrote: Can you post picture from itoolradar fw next

I can, but tomorrow it will be too late to go down to the garage again.

***Bimmer540*** · 21-04-2022, 20:40 PM,

Try

BMW_ISPI_ICOM-FW_03-22-11.msi

***Node*** · 21-04-2022, 21:17 PM,

ICOM Next should read all BMW cars. If it can't then either it's faulty or there is something wrong with a car.

***ferrum*** · 22-04-2022, 00:39 AM,

It is faulty, there is no switching on pin 8 and most likely one of the 393 is faulty

***vld*** · 22-04-2022, 10:44 AM,

(22-04-2022, 00:39 AM) ferrum Wrote: It is faulty, there is no switching on pin 8 and most likely one of the 393 is faulty

Hi, I enclose a few screenshots and logs of the device, if anything more can be understood from them.

The device test passes without error.
If there is a defective element on the motherboard, I hope to replace it without additional conditions, it was purchased from a company distributor of OEM parts.

***stefankrol*** · 22-04-2022, 12:28 PM,

What are your settings in ISTA?

***vld*** · 22-04-2022, 16:47 PM,

(22-04-2022, 12:28 PM)stefankrol Wrote: What are your settings in ISTA?

I have no problem with the connection to vehicles set up on a local network with DHCP of ICOM.
I have diagnosed and programmed dozens of E9x / E6x / E7x / F10 / F30 and so on.
There is a problem specifically with the connection to the old E46 / E39 / E53 / E83.
And since until recently I used an ICOM A2 clone with which I had no problems connecting to any car, now I expected the same from ICOM NEXT A.
I have had it for a month and only now I had to inspect such a car and accordingly I realized that there is a problem.

***Bimmer540*** · 22-04-2022, 17:21 PM,

When you connect old E46 / E39 / E53 / E83, you must give in first full vin and then connect to car...

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	[MEGA] ESYS + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS	hashtagmaster	115	38,358	2 hours ago Last Post: hashtagmaster
	BMW ICOM NEXT ORI All LED RED	aloxo	7	321	Yesterday, 21:56 PM Last Post: ferrum
	[RESTARTED] icom next clone repair (only single pcb)	____ANGEL___	51	5,427	Yesterday, 08:54 AM Last Post: ferrum
	ICOM resetting with 4.47	mcrussell	14	761	04-06-2024, 12:01 PM Last Post: NeRkO20
	EGS issue on F48 auto gearbox	lalillo89	1	158	01-06-2024, 19:17 PM Last Post: kimz
	The issue from the seventh circle of hell,,, 530d	mj_mj_mj	24	1,503	27-05-2024, 11:21 AM Last Post: mj_mj_mj
	ENTRYEVO Service Entry Issue	mcrussell	4	193	26-05-2024, 01:50 AM Last Post: mcrussell
	ICOM Firmware (NEXT & A2) always current!	Vojno	207	45,031	25-05-2024, 20:09 PM Last Post: Neon10
	Issue with F60	Siki78	2	92	23-05-2024, 18:07 PM Last Post: Siki78
	How to use ICOM with BMW VirtualGT1	qeen	0	124	09-05-2024, 18:55 PM Last Post: qeen

Contact Us