Possibly Related Threads…

***vld*** · 21-04-2022, 20:10 PM,

Hello, I have an ICOM NEXT original that can't read E83 3.0d '06, why is this due to the fact that there is no support for the K line? I used to have an ICOM A2 clone and I never had to build a bridge between 7 and 8 pins and now ICOM NEXT did not want to read any module and did not identify the car at all until I made a 7 and 8 pin bridge.

Do you have any idea why this is so?
The firmware of ICOM NEX is FW_03-15-08
ISTA Standalone 4.34.4x

Any help will be helpful.

***Bimmer540*** · 21-04-2022, 20:18 PM,

Can you post picture from itoolradar fw next

***vld*** · 21-04-2022, 20:26 PM,

(21-04-2022, 20:18 PM)Bimmer540 Wrote: Can you post picture from itoolradar fw next

I can, but tomorrow it will be too late to go down to the garage again.

***Bimmer540*** · 21-04-2022, 20:40 PM,

Try

BMW_ISPI_ICOM-FW_03-22-11.msi

***Node*** · 21-04-2022, 21:17 PM,

ICOM Next should read all BMW cars. If it can't then either it's faulty or there is something wrong with a car.

***ferrum*** · 22-04-2022, 00:39 AM,

It is faulty, there is no switching on pin 8 and most likely one of the 393 is faulty

***vld*** · 22-04-2022, 10:44 AM,

(22-04-2022, 00:39 AM) ferrum Wrote: It is faulty, there is no switching on pin 8 and most likely one of the 393 is faulty

Hi, I enclose a few screenshots and logs of the device, if anything more can be understood from them.

The device test passes without error.
If there is a defective element on the motherboard, I hope to replace it without additional conditions, it was purchased from a company distributor of OEM parts.

***stefankrol*** · 22-04-2022, 12:28 PM,

What are your settings in ISTA?

***vld*** · 22-04-2022, 16:47 PM,

(22-04-2022, 12:28 PM)stefankrol Wrote: What are your settings in ISTA?

I have no problem with the connection to vehicles set up on a local network with DHCP of ICOM.
I have diagnosed and programmed dozens of E9x / E6x / E7x / F10 / F30 and so on.
There is a problem specifically with the connection to the old E46 / E39 / E53 / E83.
And since until recently I used an ICOM A2 clone with which I had no problems connecting to any car, now I expected the same from ICOM NEXT A.
I have had it for a month and only now I had to inspect such a car and accordingly I realized that there is a problem.

***Bimmer540*** · 22-04-2022, 17:21 PM,

When you connect old E46 / E39 / E53 / E83, you must give in first full vin and then connect to car...

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Kafas issue aftrer ACC Retrofit	It3_Magic	14	605	23-04-2024, 07:44 AM Last Post: It3_Magic
	[MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS	hashtagmaster	105	36,104	17-04-2024, 18:36 PM Last Post: hashtagmaster
	TMS FRM3 F10 Coding issue	mj_mj_mj	17	1,935	16-04-2024, 09:30 AM Last Post: user_530d
	ICOM Firmware (NEXT & A2) always current!	Vojno	206	43,344	12-04-2024, 23:36 PM Last Post: bennymx
	Poor wifi signal from new ICOM's	bmchicago	3	331	12-04-2024, 18:55 PM Last Post: Node
	BMW G32 6 GT - Central Lock Issue	DaBotta	3	184	06-04-2024, 07:44 AM Last Post: Volum
	Solved ✔ ICOM NEXT Error	bmwcare	4	2,493	01-04-2024, 11:34 AM Last Post: ivanp
	CCC flash WINKFP ICOM	BimmerSLO	9	373	29-03-2024, 19:17 PM Last Post: Hoborg
	The issue from the seventh circle of hell,,, 530d	mj_mj_mj	18	1,187	27-03-2024, 14:07 PM Last Post: ____ANGEL___
	I020 esys connection issue	mcrussell	6	326	25-03-2024, 23:35 PM Last Post: vanos

Contact Us