[Matthew53]

True, I´ve found a Info and the guy uesd an old D-Link DUB-USB E100...just searched on ebay for it...30€ so could be a "soultion".

I am pretty sure that I don´t have the proper pins need on CIC and on OBD side

Is there no other option to virginze?

IF not, I really have to buy this D-Link DUB-USB E100 and look for the pins to connect to obd too

I already provided you the pinout at my post so just buy pins to OBD port or buy used OBD plug with cables. On cic side you can use any cables from any other module, so just take from junkyard any module with standard small pins. You will either connect ethernet wires or use old D-link, or you can desloder the memory and change directly in dump but it's definitely not the way you want to go

[NeRkO20]

True, desoldering is not the way
Just ordered an old D-Link....in Parallel I´ll get some harness with OBD socket...
Should arrive this week... I´ll report here.

As I see on the pinouts, there is no need for 12V

[NeRkO20]

DLINK also didn't work for me.
Finally connected via ethernet directly to cic and I didn't use tftpd64 as it didn't show me anything.
Just used the ip shown with tool32.

Data01,data02,data03 I opend with Editor and emptied them.
Also replaced the SWTData file with the vrigin one here from forum.

But I have still same issue that the SW certificate is rejeceted. I am running crazy
The Screenshot is showing the status of all 3 FSC (17,19 and 1b)

Anyone an Idea how to fix this?

[jararak]

are you trying to save original fsc files or custom?
if custom - you need to fix it with usb-patch first, but there you need newest firmware prior all work - codding index c1a
if original - you don't have sign certificate, so you should not play with it

[NeRkO20]

The CIC as I said is OEM in this car. But HDD was damaged. So first I did was to flash because of old software. So yes I´ve flashed 5x or more...it is last index

I wanted to patch because the car was delivered without SA620 - Voicecontrol

And yes, after making the CIC virgin...I´ve put first the patch and got the red screen+reboot

I don´t know why this is not working, until yet never needed to connect via FTP and make virigin.

Any ideas how to proceed?

Do I have to delete also scert.swt/fcert.swt/rcert.fsw?

[NeRkO20]

   
What is this fu***** SW signature?
I´ve virginized again, and flashed again. Afterwards just did GET_STATUS nothing else (did not upload any certificate or FSC) ang got again "SW signature rejeceted"

[Matthew53]

What is this fu***** SW signature?
I´ve virginized again, and flashed again. Afterwards just did GET_STATUS nothing else (did not upload any certificate or FSC) ang got again "SW signature rejeceted"

When you uploaded usb patch, did you try to activate generated FSC?

[NeRkO20]

   
tried once...but doesn´t work...look at attachment...that is the best I´ve "reached"

[Matthew53]

Try to activate via dr.gini b014 or b022

[NeRkO20]

Try to activate via dr.gini b014 or b022

I have only B021 here....

EDIT: have now B022

But what u mean? To proceed with OEM rep.FSC package? Or to patch with intel123 method, and then put in slef-generated FSCs?