Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solution G3x LCI Tail lights
09-08-2022, 20:29 PM,
Post: #31
|
|||
|
|||
RE: Solution G3x LCI Tail lights
(09-08-2022, 02:09 AM)simonchs Wrote:(08-08-2022, 22:17 PM)Airbus Wrote: I updated to 21-11 software from 17-03... Can you post a screen of the latest svt? |
|||
11-08-2022, 18:55 PM,
Post: #32
|
|||
|
|||
RE: Solution G3x LCI Tail lights
Never met such issue.
Update and code without any other ccm delete. All my knowledge is free for exchange with valuable information
Sharing->Development
|
|||
05-10-2022, 20:53 PM,
Post: #33
|
|||
|
|||
RE: Solution G3x LCI Tail lights
I have I-STEP 21-07 in G31 added HELC and coding FDL parameters doesn't fix rear lights faults errors, is it can be the firmware with bugs? Should i flash BDC with newer PSDZDATA and coding with HELC?
|
|||
06-10-2022, 07:24 AM,
Post: #34
|
|||
|
|||
RE: Solution G3x LCI Tail lights
yes you should flash it to the latest version and it will be solved
|
|||
Reputation: +1 - zygi898 [+1] | |||
06-10-2022, 08:30 AM,
Post: #35
|
|||
|
|||
RE: Solution G3x LCI Tail lights
(05-10-2022, 20:53 PM)zygi898 Wrote: I have I-STEP 21-07 in G31 added HELC and coding FDL parameters doesn't fix rear lights faults errors, is it can be the firmware with bugs? Should i flash BDC with newer PSDZDATA and coding with HELC? with 22-07 ilevel all good. added wires to trunk lamps, coded with helc, all good BMW FSC RETROFIT PACK: CIC / NBT / NBTevo ID4/5/6 entryevo
Carplay NBTEVO, ENTRYEVO, MGU MAPS codes for maps: Premium - Motion - Move - Route - Next - Evo - Way Best prices PM |
|||
Reputation: +1 - zygi898 [+1] | |||
06-10-2022, 09:46 AM,
Post: #36
|
|||
|
|||
RE: Solution G3x LCI Tail lights
|
|||
06-10-2022, 13:18 PM,
Post: #37
|
|||
|
|||
RE: Solution G3x LCI Tail lights
if you are using enet, connect via VIN, if you use ICOM connect with ip after you reserve it. It is a regular flash, like any other module, no special measure needed.
|
|||
06-10-2022, 14:30 PM,
Post: #38
|
|||
|
|||
RE: Solution G3x LCI Tail lights
(05-10-2022, 20:53 PM)zygi898 Wrote: I have I-STEP 21-07 in G31 added HELC and coding FDL parameters doesn't fix rear lights faults errors, is it can be the firmware with bugs? Should i flash BDC with newer PSDZDATA and coding with HELC? 1) Programming BDC_BODY I-Step «21-07-XX» аnd up; 2) Add to FA HO-WORT – «HELC» and coding BDC; 3) FDL Coding: BDC (CAFD 7083 or 5FA9) BL_L_CCM / CCM_346 [01 5A] BL_L_IS_LED / NICHT_AKTIV, DEFAULT [00] BL_L_MIN_PWM / 5% [05] BL_L_WARMUEBERWACHUNG / NICHT_AKTIV [00] BL_R_CCM / CCM_345 [01 59] BL_R_IS_LED / NICHT_AKTIV, DEFAULT [00] BL_R_MIN_PWM / 5% [05] BL_R_WARMUEBERWACHUNG / NICHT_AKTIV [00] LIC_FEATURE_3 / ENABLE LIC_FEATURE_11 / ENABLE |
|||
14-10-2022, 06:15 AM,
Post: #39
|
|||
|
|||
RE: Solution G3x LCI Tail lights
(06-10-2022, 14:30 PM) KEIN Wrote: 1) Programming BDC_BODY I-Step «21-07-XX» аnd up; So i have update BDC to 22-03 add HELC and code it, then changed FDL like you say, and its working for 30 minutes... after car is going to sleep and wake up fault of brake light its on again... All tail light are working (parking, turn signals, stop, fog, i have checked wiring double and it it correct as BMW says in official retrofit document. What i am doing wrong? |
|||
14-10-2022, 17:43 PM,
Post: #40
|
|||
|
|||
RE: Solution G3x LCI Tail lights
(14-10-2022, 06:15 AM)zygi898 Wrote:(06-10-2022, 14:30 PM) KEIN Wrote: 1) Programming BDC_BODY I-Step «21-07-XX» аnd up; Update to 22-07. 22-03 made problems on this retrofit. Done a couple of them around March and had to reflash every car to 22-07 to fix the issues. |
|||
Reputation: +1 - zygi898 [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content