[tste1982]

Hi,

does anybody have a solution for the retrofit of the tail lights on a G31? 

I used the latest software and added -HELC to the VO.

Then i used the coding values posted for G30. Now it shows brake light error in the check control. When reading out it shows inner blinker left and right. 

How to solve this?

Thanks.

BR

[elthox]

did you fdl code for the brake light?

[tste1982]

yes,

at least:

bl_l_ccm -> off
bl_l_warmueberwachung -> nicht_aktiv
bl_l_is_led -> nicht_aktiv
bl_l_min_pwm -> 5%

and the same for the bl_r. but still the error in the check control is brake light left and right. In ISTA it shows inner blinker left and right as an error.

[Stratofortress]

Have you tested as follows:

BL_L_CCM: ccm_346
BL_R_CCM: ccm_345

[tste1982]

yes, didn’t do a difference.

G30 is no problem but G31 came ip with those errors.

[krug]

no FDL coding needed, only HELC, same as G30!!!

[elthox]

yes,

at least:

bl_l_ccm -> off
bl_l_warmueberwachung -> nicht_aktiv
bl_l_is_led -> nicht_aktiv
bl_l_min_pwm -> 5%

and the same for the bl_r. but still the error in the check control is brake light left and right. In ISTA it shows inner blinker left and right as an error.

and kalt?

[tste1982]

yes,

at least:

bl_l_ccm -> off
bl_l_warmueberwachung -> nicht_aktiv
bl_l_is_led -> nicht_aktiv
bl_l_min_pwm -> 5%

and the same for the bl_r. but still the error in the check control is brake light left and right. In ISTA it shows inner blinker left and right as an error.

and kalt?

Kaltueberwachung is on nicht_aktiv as default when vo coding with helc.

[rocdeng]

Did u double checked the wire reconnection of rear light plug?

[tste1982]

All lights are working properly. Just the error comes up when using the turn signal and showing brake light.