Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
01-05-2023, 13:20 PM,
Post: #871
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(30-04-2023, 15:19 PM)NeRkO20 Wrote: You have to Flash CIC with Winkpf, then put in the patch via USB from this topic here (link on first side). Fstool2 here I can connect with the CIC and change the vin number so I think it's working. Power supply I have for 14.5v 200Ah. ICOM NEXT AND ICOM B MOST I HAVE BOTH. |
|||
01-05-2023, 13:31 PM,
Post: #872
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
Then we could try.
Which patch you uploaded? From this topic or? Got the red screen? .:: Thanks+Rep doesn´t kill anybody ::.
|
|||
01-05-2023, 13:34 PM,
Post: #873
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(01-05-2023, 13:31 PM)NeRkO20 Wrote: Then we could try. The patch that was used was generated by hutool that comes with the sedoy installation CIC works normally only navigation and voice command is grayed out When I check status of fscs all are rejecting in red |
|||
03-05-2023, 08:25 AM,
Post: #874
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
Hi all. With this patch, you can start navigation in Cic-Mid? Or just Cic?
|
|||
03-05-2023, 08:27 AM,
Post: #875
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(03-05-2023, 08:25 AM)Romashka Wrote: Hi all. With this patch, you can start navigation in Cic-Mid? Or just Cic? Only CIC (Professional) .:: Thanks+Rep doesn´t kill anybody ::.
|
|||
03-05-2023, 08:34 AM,
Post: #876
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
Please tell me more)) Is there the same solution for Cic-Mid? Or just a snag on the Can bus?
|
|||
10-05-2023, 08:04 AM,
Post: #877
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
I don´t know if there is an solution with CAN Filter. Never used. But patching and generating FSC only with CIC (Professional) possible
.:: Thanks+Rep doesn´t kill anybody ::.
|
|||
21-07-2023, 13:21 PM,
Post: #878
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
Hello,
I have a BMW F30 318D 07/2012 with Business navigation CID 6,5" I want updated my car with CIC NBT professionnal and CID 8,8"... CIC patcher V2 and FCSTOOLS is good for this operation? I can use CIC NBT from USA for my EU car? Thanks a lot. |
|||
22-07-2023, 18:01 PM,
Post: #879
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
Hello, I have a CIC of an E90 that does not accept the Patch.
If I use activation via USB script the screen turns red but it doesn't activate navigation. I flashed the CIC with winkfp but it stays the same, swtpatcher doesn't work the screen doesn't turn red, if I put the USB script for activation again it restarts in red but it still doesn't give navigation. anyone with similar problem? car originally had no navigation system. Thanks |
|||
24-07-2023, 05:51 AM,
(This post was last modified: 24-07-2023, 05:55 AM by NeRkO20.)
Post: #880
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(21-07-2023, 13:21 PM)ipcsr76 Wrote: Hello, Do you want CIC or NBT? There is no "CIC NBT Headunit" So if you want CIC (Professional) yes, you can use this patcher with ECE or US Headunit. (22-07-2023, 18:01 PM)Pedrom92 Wrote: Hello, I have a CIC of an E90 that does not accept the Patch. I think you didn´t understood what patcher V2 is doing. After putting the patch via USB the Navigation will not be activated. You have to generate your own FSCs to get Navigation running. There is another thread and another patch which activates the HU after putting the USB stick into the HU. But now this will not work as you already have used this patch from this thread here .:: Thanks+Rep doesn´t kill anybody ::.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content