[CenturionM]

Hi

password to the archive ONLY by PM after adding a positive opinion +1 and thanking Thanx

password only for people with at least 150 positive opinions

VCDS to the interfaces on the ATMEGA processor

when installing, check the "install older drivers" option

lang: ENG and POLiSH

VCDS 23.3.0-EN, AKP 22.10.0 / EN+PL - older interfaces ATMEGA

How to install VAG 23.3.0 / 22.10.0 in the PC

 

This cable suggests not using the internet, official software usage can often be blocked.

a. Turn off antivirus such as AVG, McAfee, etc.

b. Disable Windows Defender

c. Block vcds on the firewall (PC firewall is not turned off).

 

Installation Guide:

 

1. Install VCDS-Release-23.3.0-Installer.exe Step by Step (If your system is 64-bit, you must install 32-bit to 64-bit)

 

 

2. If the installation was successful, please do not run the vcds release 23.3.0 software and delete the shortcuts for the computer desktop VCDS version 23.3.0.

 

 

3. Copy the CD program VCDSLoader.exe into the installation folder (C: Ross-Tech / VCDS) and create the shortcut to your desktop.

 

 

4.First time to plug cables into the PC, wait a while to run VCDSLoader.exe. Click Options to run the self-test, and then click Save Data.

 

 

5. Turn off all vcds software, plug in your car, and run VCDSLoader.exe again.

 

 

Note: If you need to unplug your antivirus, release 23.3.0 is original software, you will need to use VCDSLoader.exe to not simply block cables.

Enjoy!

[bingo1309]

for ATMEGA during diagnostics on new cars i get update cable firmware, how to fix this issue

[CenturionM]

for ATMEGA during diagnostics on new cars i get update cable firmware, how to fix this issue

I don't know what interface you have there


install new software with the option to install old drivers

[mattydr67]

for ATMEGA during diagnostics on new cars i get update cable firmware, how to fix this issue

If your interface has an older firmware then fw1.96 ( the last for VCDS Atmega162 based ) then if it ask to upgrade the firmware it ain't a issue. Its normal otherwise the interface will cannot works with the newer VCDS version you try it.
VCDS Atemga 162 trick is in eeprom not in firmware.
Good luck

[CenturionM]

for ATMEGA during diagnostics on new cars i get update cable firmware, how to fix this issue

If your interface has an older firmware then fw1.96 ( the last for VCDS Atmega162 based ) then if it ask to upgrade the firmware it ain't a issue. Its normal otherwise the interface will cannot works with the newer VCDS version you try it.
VCDS Atemga 162 trick is in eeprom not in firmware.
Good luck

I have seen software that updates the device's firmware

[bingo1309]

for ATMEGA during diagnostics on new cars i get update cable firmware, how to fix this issue

If your interface has an older firmware then fw1.96 ( the last for VCDS Atmega162 based ) then if it ask to upgrade the firmware it ain't a issue. Its normal otherwise the interface will cannot works with the newer VCDS version you try it.
VCDS Atemga 162 trick is in eeprom not in firmware.
Good luck

I have seen software that updates the device's firmware

in my case i dont know to update and also, vcds loader plus dont support the cable, i dont know what to do

---

for ATMEGA during diagnostics on new cars i get update cable firmware, how to fix this issue

If your interface has an older firmware then fw1.96 ( the last for VCDS Atmega162 based ) then if it ask to upgrade the firmware it ain't a issue. Its normal otherwise the interface will cannot works with the newer VCDS version you try it.
VCDS Atemga 162 trick is in eeprom not in firmware.
Good luck

Well, I don’t know or know about this upgrade. because of 1 cable I already destroyed doing an eeprom update. so don’t want to destroy this, if you can help me out I can privately message you.

[CenturionM]

for ATMEGA during diagnostics on new cars i get update cable firmware, how to fix this issue

If your interface has an older firmware then fw1.96 ( the last for VCDS Atmega162 based ) then if it ask to upgrade the firmware it ain't a issue. Its normal otherwise the interface will cannot works with the newer VCDS version you try it.
VCDS Atemga 162 trick is in eeprom not in firmware.
Good luck

I have seen software that updates the device's firmware

in my case i dont know to update and also, vcds loader plus dont support the cable, i dont know what to do

---

for ATMEGA during diagnostics on new cars i get update cable firmware, how to fix this issue

If your interface has an older firmware then fw1.96 ( the last for VCDS Atmega162 based ) then if it ask to upgrade the firmware it ain't a issue. Its normal otherwise the interface will cannot works with the newer VCDS version you try it.
VCDS Atemga 162 trick is in eeprom not in firmware.
Good luck

Well, I don’t know or know about this upgrade. because of 1 cable I already destroyed doing an eeprom update. so don’t want to destroy this, if you can help me out I can privately message you.

Vcds plus not work atmega

[bingo1309]

can someone give me eeprom firmware and upgrade software so i can upgrade atmega cable of mine

[CenturionM]

can someone give me eeprom firmware and upgrade software so i can upgrade atmega cable of mine

buy a new cable on ali, after all, vcds costs pennies

[Mario68]

can someone give me eeprom firmware and upgrade software so i can upgrade atmega cable of mine

After downloading the file (KOLIMER V 9.2) you will find everything you need to interface with ATMEGA 162.

You can program your cable via USB or external programmer.

Try.