[pablito94]

Hi everyone.

Has someone of You already done conversion from RHD to LHD ? Only thing I would struggling with is wiring harness.

If anyone done it before - please give me some advice.

Also If anyone interested of it,please let me know so I will post progress of it and I will share my suggestions for someone else.

Cheers.

[aleksandrw]

Hi everyone.

Has someone of You already done conversion from RHD to LHD ? Only thing I would struggling with is wiring harness.

If anyone done it before - please give me some advice.

Also If anyone interested of it,please let me know so I will post progress of it and I will share my suggestions for someone else.

Cheers.

hello ! i did a few , i used harness from lhd

[pablito94]

Hi everyone.

Has someone of You already done conversion from RHD to LHD ? Only thing I would struggling with is wiring harness.

If anyone done it before - please give me some advice.

Also If anyone interested of it,please let me know so I will post progress of it and I will share my suggestions for someone else.

Cheers.

hello ! i did a few , i used harness from lhd

Thanks for reply !
It is very hard to find well equiped wiring harness :/
What have You done when some equipment was missing in LHD harness ?
If You can tell me how hard was to convert F10 to LHD and what was the hardest thing to do I will be appreciated if You have some adivce for me before I start would be nice.

[mdomel]

The most important thing is the selection of the car's wiring harness. If something isn't there, it just adds up.
The rest is quite simple.
I've made some BMWs from the "F" series

[pablito94]

The most important thing is the selection of the car's wiring harness. If something isn't there, it just adds up.
The rest is quite simple.
I've made some BMWs from the "F" series

I already have wiring harness from LHD F10 but unfortunately is not very well equipped - need to take lots of extra system from original harnes to LHD.

Let's cross the fingers !

[pablito94]

Hello again

whole interior has been disasembly and numbers of wirings is huge  

Can anybody explain me the reason to install wiring harness from LHD car ? What about missing equipment in this wiring harness compare to RHD from donor car ? In this case the orginall wirings must be split and take extra equpiments (wirings) off and put into the new one ?

To be honest - for me looks like the only changes in wirings is behind  the dash because fuse box and modules in trunk are in the same place as in LHD car.

Any advice from You will be great.

[pablito94]

Hello,

is the interior wiring harness from F02 the same as F10 LCI ?

[Bagum4uk]

Hello,

is the interior wiring harness from F02 the same as F10 LCI ?

Of course NO!

[kola]

Hello again

whole interior has been disasembly and numbers of wirings is huge  

Can anybody explain me the reason to install wiring harness from LHD car ? What about missing equipment in this wiring harness compare to RHD from donor car ? In this case the orginall wirings must be split and take extra equpiments (wirings) off and put into the new one ?

To be honest - for me looks like the only changes in wirings is behind  the dash because fuse box and modules in trunk are in the same place as in LHD car.

Any advice from You will be great.

Modules on front car like frm, kafas, cas, junction box, are on other side. Plugs for heater also are in other side. For peace on mind just put lhd wiring harness, rest of equipment just add. F02 qre not the same wiring. It is LCI car or Pre LCI?

[pablito94]

Hello again

whole interior has been disasembly and numbers of wirings is huge  

Can anybody explain me the reason to install wiring harness from LHD car ? What about missing equipment in this wiring harness compare to RHD from donor car ? In this case the orginall wirings must be split and take extra equpiments (wirings) off and put into the new one ?

To be honest - for me looks like the only changes in wirings is behind  the dash because fuse box and modules in trunk are in the same place as in LHD car.

Any advice from You will be great.

Modules on front car like frm, kafas, cas, junction box, are on other side. Plugs for heater also are in other side. For peace on mind just put lhd wiring harness, rest of equipment just add. F02 qre not the same wiring. It is LCI car or Pre LCI?

Hi,

My f10 is LCI model and is very hard to find this wiring harness. I am guessing that wirings from F11 LCI will be the same but it doesn’t make it easier either..