[Cro]

if you don't want issue on display stay on 18-03

Tell me more. What problems remain? Navigation is hidden from the menu.
Attempts to trigger a black screen are unsuccessful. When opening the car, you may see the message "No signal," but you must open the door quickly to get to this.
It's been 24 hours now and I haven't noticed any issues. I'm using  id3 screen, which is what this theme is for.

you can flash the latest ilevel, but you will have intermittent black screen issues which will be fїжed by a headunit reboot, however there is a permanent solution for this that can be implemented to fїж this and enable the screen to function normally

[vipsha]

if you don't want issue on display stay on 18-03

Tell me more. What problems remain? Navigation is hidden from the menu.
Attempts to trigger a black screen are unsuccessful. When opening the car, you may see the message "No signal," but you must open the door quickly to get to this.
It's been 24 hours now and I haven't noticed any issues. I'm using  id3 screen, which is what this theme is for.

you can flash the latest ilevel, but you will have intermittent black screen issues which will be fїжed by a headunit reboot, however there is a permanent solution for this that can be implemented to fїж this and enable the screen to function normally

---

if you don't want issue on display stay on 18-03

Tell me more. What problems remain? Navigation is hidden from the menu.
Attempts to trigger a black screen are unsuccessful. When opening the car, you may see the message "No signal," but you must open the door quickly to get to this.
It's been 24 hours now and I haven't noticed any issues. I'm using  id3 screen, which is what this theme is for.

you can flash the latest ilevel, but you will have intermittent black screen issues which will be fїжed by a headunit reboot, however there is a permanent solution for this that can be implemented to fїж this and enable the screen to function normally

So the solution is in the header of this topic. I applied it, there is no black screen.

[Cro]

So the solution is in the header of this topic. I applied it, there is no black screen.

i guess you will have to wait and see
multiple people said it does not work perfectly

[ruben_17non]

This work in last firmware?
before work fine for me, but after flash to last and activate by feature installer, stop work.
now only show in APIX1 boot logo, not menu (Black screen)

[vipsha]

This work in last firmware?
before work fine for me, but after flash to last and activate by feature installer, stop work.
now only show in APIX1 boot logo, not menu (Black screen)

This works for screen version id3 (not screen id4). I've been sitting here for two days, turning it on and off, driving... No black screens.

[ruben_17non]

This work in last firmware?
before work fine for me, but after flash to last and activate by feature installer, stop work.
now only show in APIX1 boot logo, not menu (Black screen)

This works for screen version id3 (not screen id4). I've been sitting here for two days, turning it on and off, driving... No black screens.

Yes I try with id3 display 
The Extrange is before work fine but after not work only boot start

This DTC B7F8C3

[DieStream]

This work in last firmware?
before work fine for me, but after flash to last and activate by feature installer, stop work.
now only show in APIX1 boot logo, not menu (Black screen)

This works for screen version id3 (not screen id4). I've been sitting here for two days, turning it on and off, driving... No black screens.

Yes I try with id3 display 
The Extrange is before work fine but after not work only boot start

This DTC B7F8C3

I don't know if it's of any use, but I recently finished setting up an NBTevo ID5 with an ID3 display and the latest firmware for an E87. Software was up to date, then the ратсн was applied via SSH, and the converter voltage was checked. It shouldn't be higher than 8.5V, and I used the F25 coding table. Since then, the navigation system no longer has a black screen.

[vipsha]

The ID3 screen turns off after applying the fїж. Is there a 100% solution?

[Gatsby79]

if you don't want issue on display stay on 18-03

Tell me more. What problems remain? Navigation is hidden from the menu.
Attempts to trigger a black screen are unsuccessful. When opening the car, you may see the message "No signal," but you must open the door quickly to get to this.
It's been 24 hours now and I haven't noticed any issues. I'm using  id3 screen, which is what this theme is for.

its a joke?

[vipsha]

if you don't want issue on display stay on 18-03

Tell me more. What problems remain? Navigation is hidden from the menu.
Attempts to trigger a black screen are unsuccessful. When opening the car, you may see the message "No signal," but you must open the door quickly to get to this.
It's been 24 hours now and I haven't noticed any issues. I'm using  id3 screen, which is what this theme is for.

its a joke?

No. Over time, the black screen became more frequent. I replaced the voltage regulator, but the black screen still appears. I don't understand why this solution is being monetized, as it's very rare to use the NBT Evo with the ID3 NBT screen.