Unfortunately we do not accept new members for free, Now яёgїsтядтїои cost 30€, if you are interesting Send Email to [email protected]
help with bricked NBTEVO HW2.3
|
05-04-2026, 11:23 AM,
(This post was last modified: 05-04-2026, 19:00 PM by Cro.)
Post: #1
|
|||
|
|||
|
help with bricked NBTEVO HW2.3
Hello, i have a bricked nbtevo id4 after someone tried to flash to id6.
Upon first inspection the headunit show "NO SIGNAL" on the display and is inaccessible on diag/ё5у5. So I dump the NOR flash from JACINTO, fresh known good dump. Situation stayed the same. Dumped fresh known good eMMC dump. After that the unit show up in ё5у5 and responds to uds commands but I can't ping it on OMAP or JACINTO ip, because of this i can not flash the headunit also, i have been successful to flash the btld only via uds but it took more then 1 hour and still on the display have "NO SIGNAL". does anyone have an idea what would be the next step in order to recover it? tried to clear v850 via ёdїдbд5 and i get "OKAY" but still same situatuon. no ethernet to hu EDIT: It's a bench setup. all the components have been tested with a known good working iD4 (zgw, harness and screen work just fine). Ethernet connectivity to the headunit works perfectly aswell. thanks in advance Motorrad f5с retrofit, Motorrad BMS IMMO solutions
MRR 0x149 retrofit, EGS7 recover via J2534 ISN 5ёяvїcё, EGS ISN reset (including EGS7 via OBD) Custom NBTEvo solutions, Physical NBTEvo repairs MGU solutions (including CP/AA activation via SSH) MG1 f5с retrofit by OBD, f5сs rejected by tuning repair Remote coding 5ёяvїcёs +REP and THANKS if I have helped you |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
05-04-2026, 17:51 PM,
Post: #2
|
|||
|
|||
RE: help with bricked NBTEVO HW2.3
(05-04-2026, 11:23 AM)Cro Wrote: Hello, i have a bricked nbtevo id4 after someone tried to flash to id6. Have you checked eth link between zgw(if on bench) and headunit F20 with a lot of retrofits: 216, 508, 521, 609 Evo, 6WA black panel, Alpine HIFI, LCI climate control…
THANKS and REP is appreciated if I helped you  |
|||
|
|
|
05-04-2026, 18:56 PM,
(This post was last modified: 05-04-2026, 18:59 PM by Cro.)
Post: #3
|
|||
|
|||
|
RE: help with bricked NBTEVO HW2.3
yes ofcourse, all the bench components are tested and working fine.
headunit we are fїжing I've edited the original post to reflect the stuff I forgot to mention Motorrad f5с retrofit, Motorrad BMS IMMO solutions
MRR 0x149 retrofit, EGS7 recover via J2534 ISN 5ёяvїcё, EGS ISN reset (including EGS7 via OBD) Custom NBTEvo solutions, Physical NBTEvo repairs MGU solutions (including CP/AA activation via SSH) MG1 f5с retrofit by OBD, f5сs rejected by tuning repair Remote coding 5ёяvїcёs +REP and THANKS if I have helped you |
|||
|
|
|
05-04-2026, 23:58 PM,
(This post was last modified: 06-04-2026, 00:00 AM by ivanivanusic.)
Post: #4
|
|||
|
|||
RE: help with bricked NBTEVO HW2.3
(05-04-2026, 18:56 PM)Cro Wrote: yes ofcourse, all the bench components are tested and working fine. If you run tool32 job to check eth link between headunit(one with the issue) and zgw, is it ok or not(since it’s not clear for me from posts)? F20 with a lot of retrofits: 216, 508, 521, 609 Evo, 6WA black panel, Alpine HIFI, LCI climate control…
THANKS and REP is appreciated if I helped you |
|||
|
|
|
06-04-2026, 06:27 AM,
Post: #5
|
|||
|
|||
|
RE: help with bricked NBTEVO HW2.3
the issue has been resolved.
it was a faulty wire Motorrad f5с retrofit, Motorrad BMS IMMO solutions
MRR 0x149 retrofit, EGS7 recover via J2534 ISN 5ёяvїcё, EGS ISN reset (including EGS7 via OBD) Custom NBTEvo solutions, Physical NBTEvo repairs MGU solutions (including CP/AA activation via SSH) MG1 f5с retrofit by OBD, f5сs rejected by tuning repair Remote coding 5ёяvїcёs +REP and THANKS if I have helped you |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| NBT EVO ID5 3.1 - Jacinto boot flash bricked, any way to recover? | Asp1DD | 8 | 543 |
21-09-2026, 05:05 AM Last Post: flashxcode |
|
| Revive Bricked CIC | malone0185 | 7 | 426 |
13-08-2026, 14:58 PM Last Post: malone0185 |
|
| Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA | f5сmap | 207 | 92,468 |
06-08-2026, 10:18 AM Last Post: alinmiron |
|
| F15 NBTevo NBT2 screen problems | tste1982 | 7 | 301 |
26-07-2026, 09:08 AM Last Post: tste1982 |
|
| Ms43 - Bricked or Recovery | IDOT | 1 | 115 |
16-04-2026, 07:02 AM Last Post: Buszkin |
|
| Nbtevo ID5 to ID6 | MCSF56JCW | 11 | 680 |
05-04-2026, 09:58 AM Last Post: bm92 |
|
| retrofit from cic -> nbtevo | redog4dy | 46 | 1,902 |
27-03-2026, 10:02 AM Last Post: user_530d |
|
| Files for bricked nbt evo | Ryn079 | 0 | 175 |
23-03-2026, 19:13 PM Last Post: Ryn079 |
|
| BRICKED NBT EVO HW2.3-HELP | grizzle | 7 | 920 |
19-03-2026, 11:55 AM Last Post: Cro |
|
| NBT EVO ID4 bricked | Albert-M | 5 | 457 |
18-03-2026, 18:56 PM Last Post: Albert-M |
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
