Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Problem with Rheingold 3.47.30
11-06-2015, 19:08 PM,
(This post was last modified: 11-06-2015, 19:40 PM by LinkX.)
Post: #1
|
|||
|
|||
Problem with Rheingold 3.47.30
Hello friends,
I have software Rheingold 3.47.30. Work good in bmw e60 and e91 but in e46 cannot (only tested in this vehicles) I test in e46 CI and CD and cannot work, someone with same problem ? Error is "cannot conected". It's like I start diagnosis without the plug is connected to the car, same error. EDIT: I use a k+dcan grey cable. Software Inpa - Work Software DIS - Not Work Software Rheingold 3.47.30 - Not Work Thanks |
|||
11-06-2015, 19:27 PM,
Post: #2
|
|||
|
|||
RE: Problem with Rheingold 3.47.30
I supose you need that female to male odb adapter for pin 7-8 connection ...
|
|||
Reputation: +2 - volavka [+2] | |||
11-06-2015, 19:39 PM,
Post: #3
|
|||
|
|||
RE: Problem with Rheingold 3.47.30
Humm, really ? I use a delphi with normal obd and work good.
Now I mentioned in the initial post that use the k+d can cable Thanks |
|||
11-06-2015, 19:45 PM,
Post: #4
|
|||
|
|||
RE: Problem with Rheingold 3.47.30
Delphi have no relation whit this.
Maybe this will help |