Unfortunately we do not accept new members for free, Now яёgїsтядтїои cost 30€, if you are interesting Send Email to [email protected]
G11 conversion from Great Britain RL to LL
|
21-06-2026, 13:46 PM,
Post: #1
|
|||
|
|||
|
G11 conversion from Great Britain RL to LL
Hi, I converted G11 from Great Britain RL to LL. I have a problem with the seats. The driver is always recognized as being on the right side. Coding and programming don't help. In the past, the driver or passenger were defined by an additional ground supply (BFS), but here both seats are powered the same. Does anyone have experience with this type of modification?
READ RULES!!!
|
|||
|
|
21-06-2026, 14:22 PM,
Post: #2
|
|||
|
|||
|
RE: G11 conversion from Great Britain RL to LL
You need to modify wires of both seats as passenger uses 1 ground more instead of driver seat,same is also on rear seats if its with electric if basic nope
Greetings EngineerX BMW\MINI\RR\SUPRA
-MGU Solution ратсн/Virgin iDrive7-8 soon 8.5 -E/F/G 6/8HP/7DTC/DKG ISN Reset -SFA/NCD 2.0/f5с Repair/SEOC/LCS/CP -KAFAS/RAM/MRR/DME Virginising -іLёаи/д05/S-Gate Supplier -Remote Tuning with ENET VAG GROUP -MIB2\MIB3 Conversion+AppleCarplay\AndroidAuto -MIB2\MIB3 Solution country conversion JAP\KO\US\EU -Hidden Feature coding -Remote Assist CP\SFD2\SVM -оdї5 E\S Supplier |
|||
|
|
|
21-06-2026, 16:41 PM,
Post: #3
|
|||
|
|||
|
RE: G11 conversion from Great Britain RL to LL
Ground Pin 8 for driver side. Pin 2 and 8 for passenger side.
|
|||
|
|
|
27-06-2026, 08:06 AM,
Post: #4
|
|||
|
|||
|
RE: G11 conversion from Great Britain RL to LL
I was cheated by BMW, the wire on pin 2 is in both seats but the physical ground is only on one
READ RULES!!!
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
