[dannoodle]

Have you tried creating a new vbox file with the VMDK image? If this doesn't work I can teamviewer you and check

You star!!

I assume everything is running correctly now?

---

UPDATED POST #1 PLEASE READ AND BMW VIRTUAL SYSTEM V3 LITE HAS BEEN POSTED

Hi Euro,

The system boots up fine I had to modify the inf file for the driver for my K+DCAN lead - I had to do this previously to get the older DIS V57 & INPA to see the lead. So my question is, when I plug my lead in and open INPA in your package is it supposed to show the battery as on when it is not connected to the car? If it is, do I need to change a port setting?

Cheers

Dan

---

FTDIBUS\COMPORT&VID_0403&PID_0000 is the driver, the lead is an F232R UART. I have had to replace the last 4 digits of the driver for it to be recognised - the original driver is "&PID_6010"

Showing battery is actually based on your Cable some FTDI chip is flashed to be like that but it should be under comport 9, I got 3 kdcan myself one shows battery on KL30, the other 2 doesn't show unless it's plugged in "true ignition"

OK, changed it to COM9 within the VM OS, what should the comport be within the VB manager and the host OS?

Cheers, greatly appreciated