Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Troubleshooting EPS and EKPS error messages
08-03-2017, 23:49 PM,
Post: #1
XZBMW  Troubleshooting EPS and EKPS error messages
Hi everyone. Looking to get some help on the following codes for a 2015 BMW M3 (F80)

I'm basically looking to see what the codes mean so I can find out exactly what's wrong with the car and what I need to replace.

EPS
0x482394 (4727700) (0xAF)
EPS motor position sensor (steering angle): Loss Multi-turn value
ICM
0xD01B2A (13638442) (0x2F)
Signal (actual position EPS, 51.0.2) invalid transmitter EPS

Also have a fuel system issue after the ISTA programming. They are:
EKPS
0xCED400 (13554688) (0x2F)
No message (delivery quantity, 0x137), receiver EKPS, transmitter DME/DDE
IHKA
0xE71442 (15144002) (0x2F)
No message (status of engine auto start, 0x30B) receiverIHKA, transmit


Attached Files Thumbnail(s)
   
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  BMW E83 A1 error - MRS: No message from DSC ... ivanp 34 1,374 Yesterday, 19:28 PM
Last Post: ivanp
  Disable CC messages relating to a CC-ID codes TheNine90 119 15,578 Yesterday, 13:18 PM
Last Post: claw
XZBMW Esys error message only on EPS. ''Failed to get CAFs for SWE'' arthur101 2 121 25-04-2024, 22:48 PM
Last Post: arthur101
  NBT Evo CAFD missing after coding error Mugga 13 618 24-04-2024, 22:47 PM
Last Post: Mugga
  BMW F20 ACSM4B internal error Pedrom92 4 169 21-04-2024, 21:54 PM
Last Post: Pedrom92
XZBMW Need help for an error. TibeRiuSca 1 89 18-04-2024, 05:19 AM
Last Post: cipi gutuie
  VO code RSE_HIGH_NBT2 error HU_man 3 166 12-04-2024, 07:08 AM
Last Post: Node
XZBMW Error by Ista ABL_DIT_AS6100_TRAMODE_RESET arcelik 18 636 08-04-2024, 19:58 PM
Last Post: Fatalix
XZBMW xdrive off with esys without error in dash dankocg 14 2,940 07-04-2024, 08:57 AM
Last Post: Fatalix
  Solved ✔ ICOM NEXT Error bmwcare 4 2,498 01-04-2024, 11:34 AM
Last Post: ivanp

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content